3069804 Phoenix Contact Terminal Blocks

Product Details

• Number of positions
  25
• Rated surge voltage
  4 kV
• Open side panel
  No
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Result of voltage-drop test
  Test passed
• Note
  25 pos.
• Short-time current
  500 A
• Number of levels
  1
• Nominal cross section
  6 mm²
• Insulating material group
  I
• Number of connections
  50
• Insulating material
  PA
• Overvoltage category
  III
• Terminal block mounting
  0.8 Nm ... 1 Nm
• Bending test rotation speed
  10 rpm
• UNSPSC 19.0
  39121410
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Color
  gray
• Maximum load current
  30 A (with 10 mm² conductor cross section)
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Length
81 mm
Stripping length
12 mm
UNSPSC 13.2
39121410
Potentials
25
Flammability rating according to UL 94
V0
Nominal voltage UN
400 V AC/DC
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
4 mm²
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
2 conductors with same cross section, stranded min.
0.2 mm²
UNSPSC 18.0
39121410
Plate thickness
1 mm ... 4 mm
Connection method
Screw connection
Connection in acc. with standard
IEC 60947-7-1
Tightening torque, min
1.5 Nm
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Test surge voltage
5 kV
Maximum power dissipation for nominal condition
1.31 W
ETIM 6.0
EC000902
UNSPSC 20.0
39121410
Oscillation, broadband noise test result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection
1 level
Conductor cross section solid max.
10 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
UNSPSC 21.0
39121410
Min. tightening torque of the mounting screw:
0.8 Nm
Max. tightening torque of the mounting screw:
1 Nm
Setpoint
5 N
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 9.0
27141126
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Width
237.8 mm
Pitch
8.2 mm
Bending test turns
135
Screw thread
M4
Conductor cross section AWG max.
8
2 conductors with same cross section, stranded max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Result of aging test
Test passed
ECLASS 11.0
27141126
ECLASS 5.0
27141100
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Tightening torque max
1.8 Nm
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Result of temperature-rise test
Test passed
Acceleration
30g
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
56.5 mm
Conductor cross section flexible min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
REACh SVHC
Lead 7439-92-1
ETIM 7.0
EC000902
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Static insulating material application in cold
-60 °C
Max. AWG conductor cross section, flexible
8
2 conductors with same cross section, solid max.
2.5 mm²
Internal cylindrical gage
A5
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of shocks per direction
3
Conductor cross section solid min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 4.0
EC000897
ECLASS 10.0.1
27141126
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.1
27141100
ECLASS 7.0
27141126
2 conductors with same cross section, solid min.
0.2 mm²
Mounting type
Wall mounting