3069803 Phoenix Contact Terminal Blocks

Product Details

• Connection
  1 level
• Number of connections
  48
• Flammability rating according to UL 94
  V0
• Rated surge voltage
  4 kV
• Open side panel
  No
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
• Result of temperature-rise test
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of thermal test
  Test passed
• Shock form
  Half-sine
• Insulating material
  PA
• Test surge voltage
  5 kV
• Maximum power dissipation for nominal condition
  1.31 W
• Result of power-frequency withstand voltage test
  Test passed
• Number of levels
  1
• Nominal cross section
  6 mm²
• Insulating material group
  I
• Maximum load current
  30 A (with 10 mm² conductor cross section)
• Result of surge voltage test
  Test passed
Result of flexion and pull-out test
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Number of positions
24
Color
gray
Overvoltage category
III
Nominal voltage UN
400 V AC/DC
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
4 mm²
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
ETIM 4.0
EC000902
ETIM 7.0
EC002555
Potentials
24
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Tightening torque, min
1.5 Nm
Conductor cross section solid max.
10 mm²
UNSPSC 20.0
20122006
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141148
Pitch
8.2 mm
Tightening torque max
1.8 Nm
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 6.0
EC002555
UNSPSC 21.0
20122006
Conductor cross section AWG min.
24
Max. AWG conductor cross section, flexible
8
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Mounting type
Wall mounting
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27141148
ECLASS 9.0
27141148
UNSPSC 18.0
20122006
Height
56.5 mm
Proof of thermal characteristics (needle flame) effective duration
30 s
Min. AWG conductor cross section, flexible
24
ASD level
6.12 (m/s2)2/Hz
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
228.2 mm
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Screw connection
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Shock duration
18 ms
Bending test turns
135
Setpoint
5 N
Short-time current
500 A
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Note
25 pos.
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Length
81 mm
Stripping length
12 mm
UNSPSC 13.2
20122006
UNSPSC 19.0
20122006
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
2 conductors with same cross section, solid max.
2.5 mm²
ECLASS 11.0
27141148
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Internal cylindrical gage
A5
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Screw thread
M4
Conductor cross section solid min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed