3069801 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  44
• Color
  gray
• Rated surge voltage
  4 kV
• Test surge voltage
  5 kV
• Terminal block mounting
  0.8 Nm ... 1 Nm
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of voltage-drop test
  Test passed
• Short circuit stability result
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Oscillation, broadband noise test result
  Test passed
• Shock test result
  Test passed
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Length
  81 mm
• Tightening torque, min
  1.5 Nm
• Number of levels
  1
• Overvoltage category
  III
• Open side panel
  No
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
Note
25 pos.
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
ASD level
6.12 (m/s2)2/Hz
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
213.2 mm
Connection method
Screw connection
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Insulating material
PA
Setpoint
5 N
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Shock duration
18 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Pitch
8.2 mm
Height
56.5 mm
Tightening torque max
1.8 Nm
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Internal cylindrical gage
A5
REACh SVHC
Lead 7439-92-1
Number of positions
22
Nominal cross section
6 mm²
Maximum power dissipation for nominal condition
1.31 W
Short-time current
500 A
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection
1 level
Stripping length
12 mm
Conductor cross section AWG min.
24
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Mounting type
Wall mounting
ECLASS 11.0
27141126
Potentials
22
Flammability rating according to UL 94
V0
Insulating material group
I
Result of surge voltage test
Test passed
Conductor cross section short circuit testing
4 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Plate thickness
1 mm ... 4 mm
Screw thread
M4
Conductor cross section flexible max.
10 mm²
Min. AWG conductor cross section, flexible
24
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Min. tightening torque of the mounting screw:
0.8 Nm
Result of tight fit on support
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
2 conductors with same cross section, solid max.
2.5 mm²
ECLASS 9.0
27141126
ETIM 7.0
EC000902
Permissible humidity (storage/transport)
30 % ... 70 %
Bending test turns
135
Max. tightening torque of the mounting screw:
1 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
UNSPSC 21.0
39121410
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
ECLASS 7.0
27141126
UNSPSC 20.0
39121410
Maximum load current
30 A (with 10 mm² conductor cross section)
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
UNSPSC 19.0
39121410
ECLASS 10.0.1
27141126
UNSPSC 18.0
39121410
Nominal voltage UN
400 V AC/DC
Result of flexion and pull-out test
Test passed
2 conductors with same cross section, solid min.
0.2 mm²
ECLASS 5.0
27141100
ETIM 4.0
EC000897
ETIM 6.0
EC000902
ECLASS 5.1
27141100
UNSPSC 13.2
39121410
Connection in acc. with standard
IEC 60947-7-1
ECLASS 6.0
27141100
Max. AWG conductor cross section, flexible
8
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)