3069800 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  42
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  1.31 W
• Test surge voltage
  5 kV
• Open side panel
  No
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
• Bending test turns
  135
• Setpoint
  5 N
• Result of temperature-rise test
  Test passed
• Short-time current
  500 A
• Result of aging test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Rated surge voltage
  4 kV
• Nominal voltage UN
  400 V AC/DC
• Result of surge voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Result of voltage-drop test
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
REACh SVHC
Lead 7439-92-1
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 4.0
EC000897
ETIM 6.0
EC000902
UNSPSC 18.0
39121410
Number of positions
21
Potentials
21
Color
gray
Flammability rating according to UL 94
V0
Overvoltage category
III
Maximum load current
30 A (with 10 mm² conductor cross section)
Result of power-frequency withstand voltage test
Test passed
Terminal block mounting
0.8 Nm ... 1 Nm
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Short circuit stability result
Test passed
Note
25 pos.
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 6.0
27141100
ECLASS 7.0
27141126
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
ECLASS 9.0
27141126
Max. tightening torque of the mounting screw:
1 Nm
Min. tightening torque of the mounting screw:
0.8 Nm
ETIM 7.0
EC000902
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141126
ECLASS 5.1
27141100
Nominal cross section
6 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Connection in acc. with standard
IEC 60947-7-1
2 conductors with same cross section, stranded min.
0.2 mm²
Result of flexion and pull-out test
Test passed
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Number of levels
1
Insulating material group
I
Power frequency withstand voltage setpoint
1.89 kV
Connection method
Screw connection
2 conductors with same cross section, solid min.
0.2 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Screw thread
M4
Connection
1 level
2 conductors with same cross section, solid max.
2.5 mm²
Test duration per axis
5 h
Conductor cross section AWG min.
24
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
81 mm
Conductor cross section solid min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Max. AWG conductor cross section, flexible
8
Test spectrum
Service life test category 2, bogie-mounted
Shock duration
18 ms
Internal cylindrical gage
A5
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Plate thickness
1 mm ... 4 mm
Tightening torque, min
1.5 Nm
Conductor cross section AWG max.
8
Min. AWG conductor cross section, flexible
24
Static insulating material application in cold
-60 °C
Width
205 mm
Pitch
8.2 mm
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Mounting type
Wall mounting
Number of shocks per direction
3
Tightening torque max
1.8 Nm
Stripping length
12 mm
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height
56.5 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)