3069660 Phoenix Contact Terminal Blocks

Product Details

• Tensile test result
  Test passed
• Result of voltage-drop test
  Test passed
• Number of positions
  12
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Maximum load current
  30 A (with 10 mm² conductor cross section)
• Result of flexion and pull-out test
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Static insulating material application in cold
  -60 °C
• Number of connections
  24
• Color
  gray
• Insulating material group
  I
• Result of surge voltage test
  Test passed
• Bending test turns
  135
• Result of temperature-rise test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Open side panel
  No
• Insulating material
  PA
Test surge voltage
5 kV
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Short circuit stability result
Test passed
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Number of levels
1
Nominal cross section
6 mm²
Maximum power dissipation for nominal condition
1.31 W
Terminal block mounting
0.8 Nm ... 1 Nm
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Setpoint
5 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
81 mm
Connection method
Screw connection
Connection
1 level
Potentials
12
Rated surge voltage
4 kV
Nominal voltage UN
400 V AC/DC
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Note
25 pos.
Short-time current
500 A
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Plate thickness
1 mm ... 4 mm
Max. AWG conductor cross section, flexible
8
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Internal cylindrical gage
A5
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 6.0
EC000902
UNSPSC 11
39121410
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Pitch
8.2 mm
Height
56.5 mm
Tightening torque, min
1.5 Nm
Conductor cross section AWG min.
24
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Mounting type
Wall mounting
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Width
131.2 mm
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
12 mm
Screw thread
M4
Tightening torque max
1.8 Nm
Conductor cross section flexible max.
10 mm²
Min. AWG conductor cross section, flexible
24
2 conductors with same cross section, solid max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Min. tightening torque of the mounting screw:
0.8 Nm
Max. tightening torque of the mounting screw:
1 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
REACh SVHC
Lead 7439-92-1
ETIM 4.0
EC000897
ECLASS 7.0
27141126
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
UNSPSC 20.0
39121410
Conductor cross section flexible min.
0.2 mm²
ECLASS 6.0
27141100
ECLASS 10.0.1
27141126
Connection in acc. with standard
IEC 60947-7-1
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ETIM 7.0
EC000902
UNSPSC 6.01
30211811
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
UNSPSC 19.0
39121410
2 conductors with same cross section, stranded max.
2.5 mm²
ECLASS 9.0
27141126
UNSPSC 12.01
39121410
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
UNSPSC 18.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 11.0
27141126
ECLASS 5.0
27141100
UNSPSC 7.0901
39121410