3069654 Phoenix Contact Terminal Blocks

Product Details

• Number of positions
  7
• Color
  gray
• Maximum load current
  30 A (with 10 mm² conductor cross section)
• Bending test turns
  135
• Tensile test result
  Test passed
• Note
  25 pos.
• Short-time current
  500 A
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock test result
  Test passed
• Shock form
  Half-sine
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Height
  56.5 mm
• Tightening torque, min
  1.5 Nm
• Conductor cross section AWG max.
  8
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• Conductor cross section flexible min.
  0.2 mm²
• REACh SVHC
  Lead 7439-92-1
• UNSPSC 13.2
  20122006
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
Connection
1 level
Nominal cross section
6 mm²
Test surge voltage
5 kV
Open side panel
No
Power frequency withstand voltage setpoint
1.89 kV
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Screw thread
M4
UNSPSC 11
39121410
UNSPSC 21.0
20122006
Potentials
7
Flammability rating according to UL 94
V0
Insulating material group
I
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
4 mm²
Result of aging test
Test passed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
81 mm
Stripping length
12 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
UNSPSC 18.0
20122006
Number of levels
1
Rated surge voltage
4 kV
Maximum power dissipation for nominal condition
1.31 W
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
ECLASS 10.0.1
27141148
ECLASS 4.1
27141100
ECLASS 9.0
27141148
Width
89.7 mm
Connection method
Screw connection
Tightening torque max
1.8 Nm
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Mounting type
Wall mounting
ETIM 7.0
EC002555
UNSPSC 12.01
39121410
Number of connections
14
Insulating material
PA
Overvoltage category
III
Nominal voltage UN
400 V AC/DC
Result of flexion and pull-out test
Test passed
Setpoint
5 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Pitch
8.2 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG min.
24
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Internal cylindrical gage
A5
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.1
27141100
UNSPSC 7.0901
39121410
UNSPSC 19.0
20122006
ETIM 4.0
EC000901
2 conductors with same cross section, solid max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
ETIM 6.0
EC002555
ECLASS 7.0
27141148
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
2 conductors with same cross section, stranded min.
0.2 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141148
UNSPSC 6.01
30211811
Max. AWG conductor cross section, flexible
8
Conductor cross section solid max.
10 mm²
UNSPSC 20.0
20122006