3069445 Phoenix Contact Terminal Blocks

Product Details

• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of voltage-drop test
  Test passed
• Number of positions
  19
• Color
  gray
• Flammability rating according to UL 94
  V0
• Open side panel
  No
• Back of the hand protection
  guaranteed
• Result of surge voltage test
  Test passed
• Result of power-frequency withstand voltage test
  Test passed
• Setpoint
  5 N
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of thermal test
  Test passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Plate thickness
  1 mm ... 4 mm
• Conductor cross section AWG max.
  8
• Conductor cross section flexible max.
  6 mm²
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock test result
  Test passed
• Shock duration
  18 ms
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
Note
The measuring transducer block is replaced every 100 cycles.
Potentials
19
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Length
100 mm
Number of levels
1
Rated surge voltage
4 kV
Maximum load current
30 A (with 6 mm² conductor cross section)
Nominal cross section
6 mm²
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Short-time current
0.15 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Shock form
Half-sine
Number of shocks per direction
3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Connection
1 level
Conductor cross section AWG min.
20
Max. AWG conductor cross section, flexible
10
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
12 mm
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Mounting type
Wall mounting
Ambient temperature (actuation)
-5 °C ... 70 °C
Tensile test result
Test passed
Conductor cross section short circuit testing
4 mm²
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
56.5 mm
Connection method
Push-in connection
Conductor cross section solid min.
1 mm²
Max. tightening torque of the mounting screw:
1 Nm
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.1
27141100
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Connection cross sections directly pluggable
1 mm² 10 mm²
Min. tightening torque of the mounting screw:
0.8 Nm
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27141126
ECLASS 6.0
27141100
ETIM 4.0
EC000897
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Pitch
8.2 mm
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
UNSPSC 19.0
39121410
Internal cylindrical gage
A5
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Result of aging test
Test passed
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 7.0
27141126
ETIM 6.0
EC000902
UNSPSC 21.0
39121410
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 7.0
EC000902
UNSPSC 20.0
39121410
ECLASS 10.0.1
27141126
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Test surge voltage
5 kV
Nominal voltage UN
400 V AC/DC
UNSPSC 18.0
39121410
Finger protection
guaranteed
ECLASS 5.0
27141100
Number of connections
38
Insulating material
PA
Note regarding shock protection
When test disconnect plug is plugged in.
UNSPSC 13.2
39121410
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Maximum power dissipation for nominal condition
1.31 W
Insulating material group
I
Terminal block mounting
0.8 Nm ... 1 Nm
Width
188.6 mm
ECLASS 9.0
27141126