3069297 Phoenix Contact Terminal Blocks

Product Details

• Result of flexion and pull-out test
  Test passed
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Nominal cross section
  6 mm²
• Tensile test result
  Test passed
• Short circuit stability result
  Test passed
• Nominal current IN
  24 A
• Result of power-frequency withstand voltage test
  Test passed
• Note
  The test with ...... mm² / .......A / ...s covers the equirements .......... mm² / ...... A / ...s acc. to IEC 60947-7-1:....-...
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Number of positions
  9
• Maximum power dissipation for nominal condition
  1.31 W
• Note regarding shock protection
  When plugged in
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test rotation speed
  10 rpm
• Conductor cross section short circuit testing
  4 mm²
• Result of voltage-drop test
  Test passed
• Short-time current
  1250 A
• ASD level
  1.857 (m/s2)2/Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Power frequency withstand voltage setpoint
1.89 kV
Setpoint
5 N
Shock test result
Test passed
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Ambient temperature (actuation)
-5 °C ... 70 °C
Finger protection
guaranteed
Bending test turns
135
Tight fit on carrier
Panel cutout
Result of thermal test
Test passed
Shock duration
30 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Pitch
8.2 mm
Insulating material
PA
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Color
gray
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Flammability rating according to UL 94
V0
Requirement temperature-rise test
Increase in temperature ≤ 45 K
ECLASS 11.0
27440313
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 1, class B, body mounted
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Nominal voltage UN
400 V
Test duration per axis
5 h
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
Potentials
9
Maximum load current
30 A
Back of the hand protection
guaranteed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ECLASS 9.0
27440313
ETIM 7.0
EC002255
UNSPSC 19.0
39121410
UNSPSC 11
39121410
ECLASS 5.1
27141100
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ETIM 6.0
EC002255
UNSPSC 7.0901
39121410
ECLASS 5.0
27141100
ETIM 3.0
EC000901
UNSPSC 13.2
39121410
UNSPSC 12.01
39121410
ECLASS 10.0.1
27440313
ETIM 4.0
EC000901
Acceleration
5g
ECLASS 7.0
27440313
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410