3069268 Phoenix Contact Terminal Blocks

Product Details

• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Result of flexion and pull-out test
  Test passed
• Setpoint
  5 N
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Pitch
  8.2 mm
• Conductor cross section flexible min.
  0.5 mm²
• Max. AWG conductor cross section, flexible
  14
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.1
  27141118
• ECLASS 7.0
  27440313
• UNSPSC 11
  39121410
• UNSPSC 19.0
  39121410
• UNSPSC 18.0
  39121410
• Color
  gray
• Nominal voltage UN
  400 V
• Note regarding shock protection
  When plugged in
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of voltage-drop test
  Test passed
• Oscillation, broadband noise test result
  Test passed
Acceleration
5g
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section flexible max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Insulating material
PA
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test turns
135
Bending test rotation speed
10 rpm
Connection method
Screw connection
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141118
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
ECLASS 10.0.1
27440313
ECLASS 5.1
27141120
ETIM 6.0
EC002255
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
4 mm²
Test spectrum
Service life test category 1, class B, body mounted
ASD level
1.857 (m/s2)2/Hz
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Min. tightening torque of the test socket screw:
0.5 Nm
Min. AWG conductor cross section, flexible
20
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141141
ETIM 4.0
EC000901
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Max. tightening torque of the test socket screw:
0.6 Nm
ECLASS 11.0
27440313
ECLASS 5.0
27141118
ECLASS 9.0
27440313
ETIM 7.0
EC002255
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Number of positions
13
Short-time current
1250 A
Nominal current IN
24 A
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Potentials
13
Flammability rating according to UL 94
V0
Back of the hand protection
guaranteed
Shock form
Half-sine
Finger protection
guaranteed
Tight fit on carrier
Panel cutout
Result of thermal test
Test passed
Nominal cross section
6 mm²
Maximum load current
24 A
Maximum power dissipation for nominal condition
1.31 W
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Note
The conductor cross section depends on the cable lug used
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
30 ms
ETIM 3.0
EC000901
UNSPSC 12.01
39121410
Test duration per axis
5 h