3069266 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Note regarding shock protection
  When plugged in
• Result of power-frequency withstand voltage test
  Test passed
• Result of temperature-rise test
  Test passed
• Setpoint
  5 N
• Short circuit stability result
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• ASD level
  1.857 (m/s2)2/Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• UNSPSC 18.0
  39121410
• Nominal cross section
  6 mm²
• Flammability rating according to UL 94
  V0
• Nominal voltage UN
  400 V
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of tight fit on support
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Short-time current
  1250 A
Test spectrum
Service life test category 1, class B, body mounted
Shock duration
30 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
ETIM 6.0
EC002255
Insulating material
PA
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Acceleration
5g
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Connection method
Screw connection
Min. tightening torque of the test socket screw:
0.5 Nm
Max. tightening torque of the test socket screw:
0.6 Nm
ECLASS 11.0
27440313
ECLASS 9.0
27440313
UNSPSC 12.01
39121410
Number of positions
11
Maximum power dissipation for nominal condition
1.31 W
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Max. AWG conductor cross section, flexible
14
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141118
ECLASS 4.1
27141118
ETIM 4.0
EC000901
UNSPSC 13.2
39121410
Potentials
11
Maximum load current
24 A
Nominal current IN
24 A
Result of flexion and pull-out test
Test passed
Bending test turns
135
Tensile test result
Test passed
Note
The conductor cross section depends on the cable lug used
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27440313
ECLASS 7.0
27440313
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Min. AWG conductor cross section, flexible
20
ECLASS 4.0
27141118
UNSPSC 19.0
39121410
Tight fit on carrier
Panel cutout
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141120
ECLASS 6.0
27141141
Ambient temperature (actuation)
-5 °C ... 70 °C
Static insulating material application in cold
-60 °C
Conductor cross section flexible min.
0.5 mm²
ETIM 3.0
EC000901
UNSPSC 11
39121410
Pitch
8.2 mm
Conductor cross section flexible max.
2.5 mm²
UNSPSC 6.01
30211811
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ETIM 7.0
EC002255
UNSPSC 20.0
39121410