3069265 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  6 mm²
• Maximum load current
  24 A
• Nominal current IN
  24 A
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Tight fit on carrier
  Panel cutout
• Short circuit stability result
  Test passed
• Color
  gray
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Note regarding shock protection
  When plugged in
• Setpoint
  5 N
• Result of temperature-rise test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• ECLASS 10.0.1
  27440313
• ECLASS 5.1
  27141120
• ECLASS 7.0
  27440313
• UNSPSC 19.0
  39121410
• UNSPSC 12.01
  39121410
• Potentials
  10
• Maximum power dissipation for nominal condition
  1.31 W
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Number of positions
10
Flammability rating according to UL 94
V0
Finger protection
guaranteed
Bending test turns
135
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section flexible max.
2.5 mm²
Pitch
8.2 mm
Max. tightening torque of the test socket screw:
0.6 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141118
ECLASS 5.0
27141118
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Conductor cross section flexible min.
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Short-time current
1250 A
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Note
The conductor cross section depends on the cable lug used
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
ECLASS 9.0
27440313
Connection method
Screw connection
UNSPSC 6.01
30211811
Max. AWG conductor cross section, flexible
14
Ambient temperature (assembly)
-5 °C ... 70 °C
Min. AWG conductor cross section, flexible
20
ETIM 4.0
EC000901
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Insulating material
PA
Nominal voltage UN
400 V
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Shock duration
30 ms
ECLASS 6.0
27141141
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Bending test rotation speed
10 rpm
Acceleration
5g
Test duration per axis
5 h
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
ECLASS 4.1
27141118
ETIM 3.0
EC000901
ETIM 6.0
EC002255
UNSPSC 13.2
39121410
Tensile test result
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Min. tightening torque of the test socket screw:
0.5 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
UNSPSC 21.0
39121410
ASD level
1.857 (m/s2)2/Hz
ECLASS 11.0
27440313
Result of surge voltage test
Test passed
Conductor cross section short circuit testing
4 mm²
Result of thermal test
Test passed
Number of shocks per direction
3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ETIM 7.0
EC002255