3069222 Phoenix Contact Terminal Blocks

Product Details

• Result of surge voltage test
  Test passed
• Number of levels
  1
• Insulating material
  PA
• Rated surge voltage
  4 kV
• Open side panel
  No
• Power frequency withstand voltage setpoint
  1.89 kV
• Tight fit on carrier
  Panel cutout
• Short circuit stability result
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Test spectrum
  Service life test category 1, class B, body mounted
• Shock test result
  Test passed
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• UNSPSC 20.0
  39121410
• Result of temperature-rise test
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• ASD level
  1.857 (m/s2)2/Hz
• Test duration per axis
  5 h
Surface flammability NFPA 130 (ASTM E 162)
passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Screw connection
UNSPSC 21.0
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000901
UNSPSC 18.0
39121410
Test directions
X-, Y- and Z-axis (pos. and neg.)
Pitch
8.2 mm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 9.0
27141190
ETIM 6.0
EC002848
Static insulating material application in cold
-60 °C
Conductor cross section flexible max.
2.5 mm²
UNSPSC 7.0901
39121410
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Max. tightening torque of the test socket screw:
0.6 Nm
ECLASS 4.0
27141100
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section flexible min.
0.5 mm²
Mounting type
Insertion in base strip
ECLASS 7.0
27141190
ECLASS 5.1
27141100
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Min. tightening torque of the test socket screw:
0.5 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ETIM 3.0
EC000901
Number of shocks per direction
3
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27141100
UNSPSC 13.2
39121410
Max. AWG conductor cross section, flexible
14
ECLASS 10.0.1
27141190
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
ECLASS 11.0
27141190
Ambient temperature (actuation)
-5 °C ... 70 °C
Color
gray
Overvoltage category
III
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test turns
135
Tensile test result
Test passed
Setpoint
5 N
Shock duration
30 ms
Number of positions
4
Flammability rating according to UL 94
V0
Nominal voltage UN
400 V
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Note
The conductor cross section depends on the cable lug used
Short-time current
1250 A
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Min. AWG conductor cross section, flexible
20
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Nominal cross section
6 mm²
Test surge voltage
5 kV
Nominal current IN
24 A
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
5g
ETIM 7.0
EC002848
Potentials
4
Maximum load current
24 A
Maximum power dissipation for nominal condition
1.31 W
Note regarding shock protection
When plugged in
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Shock form
Half-sine