3069065 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  8
• Flammability rating according to UL 94
  V0
• Test surge voltage
  5 kV
• Nominal current IN
  24 A
• Back of the hand protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Setpoint
  5 N
• Short-time current
  1250 A
• Number of connections
  16
• Rated surge voltage
  4 kV
• Open side panel
  No
• Note regarding shock protection
  When plugged in
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Tensile test result
  Test passed
• Note
  The test with ...... mm² / .......A / ...s covers the equirements .......... mm² / ...... A / ...s acc. to IEC 60947-7-1:....-...
• Oscillation, broadband noise test result
  Test passed
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Width
  99 mm
• Connection
  1 level
Screw thread
M4
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG max.
8
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Max. tightening torque of the mounting screw:
1 Nm
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27141148
ECLASS 5.0
27141100
Nominal cross section
6 mm²
Maximum load current
30 A (with 10 mm² conductor cross section)
Nominal voltage UN
400 V
Terminal block mounting
0.8 Nm ... 1 Nm
Power frequency withstand voltage setpoint
1.89 kV
Tight fit on carrier
Panel cutout
Result of temperature-rise test
Test passed
Shock duration
30 ms
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Tightening torque, min
1.5 Nm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Mounting type
Wall mounting
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141148
ECLASS 5.1
27141100
ETIM 3.0
EC000901
ETIM 7.0
EC002555
Stripping length
10 mm
Connection in acc. with standard
IEC 60947-7-1
Number of levels
1
Insulating material
PA
Overvoltage category
III
Tightening torque max
1.8 Nm
Max. AWG conductor cross section, flexible
8
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height
81 mm
Conductor cross section flexible max.
10 mm²
ECLASS 9.0
27141148
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 13.2
20122006
UNSPSC 20.0
20122006
Result of surge voltage test
Test passed
Number of positions
8
Conductor cross section short circuit testing
4 mm²
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Color
gray
Insulating material group
I
Result of power-frequency withstand voltage test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Plate thickness
1 mm ... 4 mm
Maximum power dissipation for nominal condition
1.31 W
Test directions
X-, Y- and Z-axis (pos. and neg.)
Bending test rotation speed
10 rpm
Static insulating material application in cold
-60 °C
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of voltage-drop test
Test passed
Number of shocks per direction
3
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
1.857 (m/s2)2/Hz
Acceleration
5g
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
2 conductors with same cross section, solid min.
0.2 mm²
Pitch
8.2 mm
Connection method
Screw connection
Conductor cross section AWG min.
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Internal cylindrical gage
A5
ECLASS 7.0
27141148
UNSPSC 11
39121410
UNSPSC 18.0
20122006
UNSPSC 21.0
20122006
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
2 conductors with same cross section, solid max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Min. tightening torque of the mounting screw:
0.8 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 4.0
27141100
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 6.0
EC002555
ETIM 4.0
EC000901
UNSPSC 19.0
20122006
UNSPSC 12.01
39121410
UNSPSC 7.0901
39121410