3050057 Phoenix Contact Terminal Blocks

Product Details

• Static insulating material application in cold
  -60 °C
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• Tightening torque, min
  0.5 Nm
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Nominal cross section
  1.5 mm²
• ECLASS 10.0.1
  27141120
• ECLASS 4.1
  27141100
• ETIM 2.0
  EC000897
• ETIM 6.0
  EC000897
• UNSPSC 11
  39121410
• UNSPSC 19.0
  39121410
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 4.0
  27141100
• ECLASS 5.0
  27141100
• ETIM 7.0
  EC000897
• UNSPSC 18.0
  39121410
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• REACh SVHC
  Lead 7439-92-1
• ECLASS 11.0
  27141120
ECLASS 7.0
27141120
ETIM 4.0
EC000897
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Nominal voltage UN
800 V
Result of surge voltage test
Test passed
Bending test rotation speed
10 (+/- 2) rpm
Bending test turns
135
Number of connections
3
Degree of pollution
3
Connection method
Screw connection
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Tight fit on carrier
NS 35
Flammability rating according to UL 94
V0
Connection in acc. with standard
CSA
Maximum power dissipation for nominal condition
0.56 W
Open side panel
Yes
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
Number of levels
1
Insulating material
PA
Overvoltage category
III
Maximum load current
17.5 A (with 1.5 mm² conductor cross section)
Nominal current IN
17.5 A
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Width
5.2 mm
Surge voltage test setpoint
9.8 kV
Finger protection
guaranteed
Color
blue
Rated surge voltage
8 kV
Result of flexion and pull-out test
Test passed
Tractive force setpoint
60 N
Short circuit stability result
Test passed
Result of aging test
Test passed
Setpoint
1 N
Conductor cross section short circuit testing
1.5 mm²
Result of thermal test
Test passed
Result of temperature-rise test
Test passed
Short-time current
0.18 kA
Test spectrum
Service life test category 2, bogie-mounted
China RoHS
Environmentally Friendly Use Period = 50 years
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Length
76.4 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
2.5 mm²
Test certificate name
KEMA 04ATEX2226 U
Screw thread
M3
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Conductor cross section tensile test
4 mm²
Acceleration
30g
Shock duration
18 ms
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/7,5
42.8 mm
Insulating material group
I
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Material wire insulation
PVC / PE
Cross section sensor cables, min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 6.0
27141100
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 35/15
50.3 mm
Max. wire diameter incl. insulation
3 mm
Conductor cross section solid min.
0.14 mm²
Cross section sensor cables, max.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Tightening torque max
0.6 Nm
Conductor cross section AWG min.
26
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
24
Max. AWG conductor cross section, flexible
16
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
UNSPSC 12.01
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
End cover width
2.2 mm
Stripping length
9 mm