3049521 Phoenix Contact Terminal Blocks

Product Details

• ETIM 2.0
  EC000897
• UNSPSC 11
  39121410
• UNSPSC 13.2
  39121410
• ECLASS 7.0
  27141120
• Open side panel
  Yes
• Nominal voltage UN
  1000 V
• Result of power-frequency withstand voltage test
  Test passed
• Setpoint
  5 N
• Result of temperature-rise test
  Test passed
• Short-time current
  0.72 kA
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Insulating material group
  I
• Result of surge voltage test
  Test passed
• Power frequency withstand voltage setpoint
  2.2 kV
• Result of voltage-drop test
  Test passed
• Test duration per axis
  5 h
• Shock form
  Half-sine
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Length
  66 mm
• Width
  16.3 mm
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Flammability rating according to UL 94
V0
Nominal current IN
41 A
Maximum load current
41 A (with 6 mm² conductor cross section)
Result of tight fit on support
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Shock test result
Test passed
Shock duration
30 ms
Nominal cross section
6 mm²
Degree of pollution
3
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Potentials
1
Maximum power dissipation for nominal condition
1.31 W
Conductor cross section short circuit testing
6 mm²
Number of connections
2
Insulating material
PA
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
ASD level
1.857 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Note
Note: the BE-RT... path extension is to be used for non-insulated cable lugs (see accessories).
Color
gray
Rated surge voltage
8 kV
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Acceleration
5g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection
1 level
Connection in acc. with standard
CUL
Number of levels
1
Overvoltage category
III
Oscillation, broadband noise test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
49.9 mm
Connection method
Bolt connection
ECLASS 4.1
27141100
End cover width
2.2 mm
Min. cross section for cable lug connection
1 mm²
Bolt diameter
5 mm
Tightening torque max
3 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 3.0
EC000897
ETIM 6.0
EC000897
Max. cross section for cable lug connection
6 mm²
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Screw thread
M5
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
UNSPSC 18.0
39121410
Cable lug width, max.
10 mm
Height NS 35/15
57.4 mm
Cable lug connection according to standard
DIN 46237:1970-07
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ETIM 4.0
EC000897
UNSPSC 21.0
39121410
AWG max
10
Hole diameter, min.
5.3 mm
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
AWG min
16
Tightening torque, min
2.5 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.0
27141100
ECLASS 9.0
27141120
UNSPSC 20.0
39121410
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
UNSPSC 6.01
30211811