3049518 Phoenix Contact Terminal Blocks

Product Details

• ECLASS 11.0
  27141120
• ECLASS 7.0
  27141120
• ETIM 6.0
  EC000897
• Stripping length
  The stripping length depends on the specification provided by the cable lug manufacturer.
• Number of connections
  2
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Acceleration
  5g
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Width
  12.3 mm
• Connection
  1 level
• Insulating material
  PA
• Degree of pollution
  3
• Nominal voltage UN
  1000 V
• Result of surge voltage test
  Test passed
• Setpoint
  1 N
• Short circuit stability result
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
ASD level
1.857 (m/s2)2/Hz
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
57.4 mm
Cable lug connection according to standard
DIN 46237:1970-07
AWG max
14
Shock test result
Test passed
Result of power-frequency withstand voltage test
Test passed
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Note
Note: the BE-RT... path extension is to be used for non-insulated cable lugs (see accessories).
Color
gray
Maximum power dissipation for nominal condition
0.77 W
Shock protection test specification
IEC 60529:2001-02
Number of levels
1
Nominal cross section
2.5 mm²
Overvoltage category
III
Maximum load current
24 A (with a 2.5 mm² conductor cross section)
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
End cover width
2.2 mm
Connection method
Bolt connection
Max. cross section for cable lug connection
2.5 mm²
Bolt diameter
3 mm
Short-time current
0.3 kA
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Shock duration
30 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Potentials
1
Rated surge voltage
8 kV
Nominal current IN
24 A
Back of the hand protection
guaranteed
Result of tight fit on support
Test passed
ECLASS 5.0
27141100
Min. cross section for cable lug connection
1 mm²
Cable lug width, max.
6 mm
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 9.0
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Open side panel
Yes
Power frequency withstand voltage setpoint
2.2 kV
Tight fit on carrier
NS 35
Oscillation, broadband noise test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Length
66 mm
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Hole diameter, min.
3.2 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ETIM 7.0
EC000897
Connection in acc. with standard
CUL
Tightening torque max
0.8 Nm
ECLASS 5.1
27141100
UNSPSC 13.2
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
ECLASS 6.0
27141100
ECLASS 4.1
27141100
UNSPSC 7.0901
39121410
Height NS 35/7,5
49.9 mm
AWG min
18
Tightening torque, min
0.6 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Screw thread
M3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
ETIM 2.0
EC000897
UNSPSC 19.0
39121410