3048373 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  35 mm²
• Flammability rating according to UL 94
  V2
• Fuse type
  Screw cartridge
• Nominal voltage UN
  500 V (the voltage is determined by the fuse used)
• Contact resistance
  Test passed
• Bending test conductor cross section/weight
  1.5 mm² / 0.4 kg
• Length
  80 mm
• Number of levels
  1
• Maximum power dissipation for nominal condition
  4.06 W
• Conductor cross section solid min.
  1.5 mm²
• Number of connections
  2
• Rated surge voltage
  6 kV
• Overvoltage category
  III
• ECLASS 4.0
  27141100
• ECLASS 6.0
  27141100
• ECLASS 7.0
  27141116
• ETIM 7.0
  EC000899
• UNSPSC 18.0
  39121410
• Color
  light gray
• Insulating material group
  IIIb
Open side panel
No
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
ECLASS 4.1
27141100
ECLASS 9.0
27141116
ETIM 3.0
EC000899
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
ECLASS 5.0
27141100
ETIM 2.0
EC000899
UNSPSC 7.0901
39121411
UNSPSC 12.01
39121411
ECLASS 5.1
27141100
ETIM 6.0
EC000899
UNSPSC 11
39121411
UNSPSC 19.0
39121410
ECLASS 11.0
27141116
ETIM 4.0
EC000899
UNSPSC 6.01
30211812
UNSPSC 21.0
39121410
Result of tight fit on support
Test passed
Width
40 mm
Conductor cross section flexible max.
35 mm²
Conductor cross section AWG max.
2
Cross section with insertion bridge, solid max.
25 mm²
2 conductors with same cross section, solid min.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
10 mm²
Stripping length
19 mm
Maximum load current
25 A (with 35 mm² conductor cross section)
Fuse
D II / E 27
Back of the hand protection
guaranteed
Pitch
40 mm
Height NS 35/7,5
62.5 mm
Height NS 35/15
70 mm
Conductor cross section flexible, with ferrule with plastic sleeve max.
25 mm²
2 conductors with same cross section, solid max.
10 mm²
2 conductors with same cross section, stranded max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
1.5 mm²
Tightening torque max
4 Nm
Tightening torque, min
3.5 Nm
Degree of pollution
3
Nominal current IN
25 A (the current is determined by the fuse used)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of flexion and pull-out test
Test passed
Result of thermal test
Test passed
Conductor cross section flexible min.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1.5 mm²
2 conductors with same cross section, stranded min.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
10 mm²
Internal cylindrical gage
B8
Ambient temperature (storage/transport)
-25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Conductor cross section solid max.
35 mm²
Conductor cross section AWG min.
16
Conductor cross section flexible, with ferrule without plastic sleeve max.
25 mm²
Cross section with insertion bridge, stranded max.
25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
1.5 mm²
Connection method
Screw connection
Screw thread
M6
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141116
Operating temperature
-60 °C ... 85 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (assembly)
-5 °C ... 70 °C