3046786 Phoenix Contact Terminal Blocks

Product Details

• 2 conductors with same cross section, stranded max.
  1.5 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 10.0.1
  27141120
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  2.5 mm²
• Tightening torque max
  0.8 Nm
• ECLASS 5.1
  27141100
• Screw thread
  M3
• ECLASS 11.0
  27141120
• ECLASS 6.0
  27141100
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 5.0
  27141100
• ECLASS 9.0
  27141120
• ETIM 4.0
  EC000901
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Maximum load current
  36 A (with 6 mm² conductor cross section)
• Result of surge voltage test
  Test passed
2 conductors with same cross section, solid min.
0.14 mm²
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Short-time current
0.48 kA
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Acceleration
30g
Length
69.9 mm
Conductor cross section AWG min.
26
Number of connections
4
Insulating material
PA
Connection in acc. with standard
CSA
Width
6.2 mm
Height NS 35/15
72.5 mm
Conductor cross section solid max.
6 mm²
Number of levels
2
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Nominal voltage UN
800 V
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Conductor cross section tensile test
6 mm²
Short circuit stability result
Test passed
Conductor cross section AWG max.
10
2 conductors with same cross section, solid max.
1.5 mm²
Internal cylindrical gage
A4
Ambient temperature (assembly)
-5 °C ... 70 °C
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of shocks per direction
3
Height NS 35/7,5
65 mm
Color
red
Degree of pollution
3
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of tight fit on support
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 2.0
EC000901
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
Nominal current IN
30 A
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Back of the hand protection
guaranteed
Bending test turns
135
Power frequency withstand voltage setpoint
2 kV
Setpoint
1 N
Conductor cross section short circuit testing
4 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Shock form
Half-sine
End cover width
2.2 mm
Stripping length
9 mm
Tightening torque, min
0.6 Nm
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible min.
0.14 mm²
Nominal cross section
4 mm²
Overvoltage category
III
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Result of flexion and pull-out test
Test passed
ECLASS 7.0
27141120
ETIM 3.0
EC000901
ETIM 6.0
EC000897
UNSPSC 11
39121410
Tractive force setpoint
80 N
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Result of thermal test
Test passed
Shock test result
Test passed
Shock duration
18 ms
Conductor cross section solid min.
0.14 mm²
Connection method
Screw connection
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Operating temperature
-60 °C ... 85 °C
ECLASS 4.0
27141100