3046703 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Maximum load current
  50 A (with 10 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  2.2 kV
• Bending test turns
  135
• Setpoint
  5 N
• Relative insulation material temperature index (Elec.; UL 746 B)
  130 °C
• End cover width
  2.2 mm
• Height NS 35/7,5
  98.8 mm
• Conductor cross section AWG min.
  24
• Degree of pollution
  3
• Connection in acc. with standard
  IEC 60947-7-1
• Nominal voltage UN
  1000 V
• Back of the hand protection
  guaranteed
• Surge voltage test setpoint
  9.8 kV
• Tractive force setpoint
  90 N
• Conductor cross section short circuit testing
  10 mm²
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Length
  110 mm
• Conductor cross section solid max.
  10 mm²
Nominal current IN
36 A
Number of positions
1
Result of power-frequency withstand voltage test
Test passed
Conductor cross section tensile test
10 mm²
Tensile test result
Test passed
Requirements, voltage drop
≤ 3.2 mV
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
8.2 mm
Open side panel
Yes
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Insulating material group
I
Result of surge voltage test
Test passed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Short-time current
1.2 kA
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
106.3 mm
Conductor cross section solid min.
0.2 mm²
Number of levels
3
Insulating material
PA
Result of temperature-rise test
Test passed
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Internal cylindrical gage
A5
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.31 W (the value is multiplied when connecting multiple levels)
Bending test rotation speed
10 rpm
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection method
Screw connection
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Screw thread
M4
Tightening torque, min
1.5 Nm
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Number of connections
6
Rated surge voltage
8 kV
Nominal cross section
6 mm²
Overvoltage category
III
Result of tight fit on support
Test passed
Conductor cross section AWG max.
8
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Stripping length
10 mm
Tightening torque max
1.8 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
2 conductors with same cross section, solid max.
2.5 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ETIM 2.0
EC000902
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 9.0
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410