3046210 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Insulating material group
  I
• Nominal current IN
  0.5 A
• Maximum power dissipation for nominal condition
  1.02 W
• Note
  The max. current is determined by the diode. Installed: Diode 1N 4007, reverse voltage: 1300 V, maximum continuous current: 0.5 A.
• Insulating material
  PA
• Maximum load current
  0.5 A
• Surge voltage test setpoint
  9.8 kV
• Bending test rotation speed
  10 rpm
• Conductor cross section tensile test
  6 mm²
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test spectrum
  Service life test category 1, class B, body mounted
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• End cover width
  2.2 mm
• Height NS 35/15
  55 mm
• Conductor cross section AWG min.
  26
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• 2 conductors with same cross section, stranded min.
  0.14 mm²
Stripping length
9 mm
Tightening torque, min
0.6 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141126
ECLASS 4.0
27141100
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Number of connections
2
Rated surge voltage
8 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of tight fit on support
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
5g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
57.8 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Connection method
Screw connection
Screw thread
M3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27141100
ETIM 2.0
EC000897
ETIM 6.0
EC000902
UNSPSC 19.0
39121410
Nominal cross section
4 mm²
Degree of pollution
3
Open side panel
Yes
Finger protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Tight fit on carrier
NS 35
Result of thermal test
Test passed
ASD level
0.02 g²/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG max.
10
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Internal cylindrical gage
A4
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Connection in acc. with standard
CSA
ECLASS 11.0
27141126
ECLASS 5.1
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Number of levels
1
Flammability rating according to UL 94
V0
Overvoltage category
III
Nominal voltage UN
800 V
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Bending test turns
135
Tensile test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock duration
30 ms
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
6.2 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Tightening torque max
0.8 Nm
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
ECLASS 7.0
27141126
ETIM 7.0
EC000902
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of flexion and pull-out test
Test passed
Tractive force setpoint
80 N
Setpoint
1 N
Test duration per axis
5 h
Shock test result
Test passed
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
6 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 9.0
27141126
ETIM 4.0
EC000897
UNSPSC 13.2
39121410