3044211 Phoenix Contact Terminal Blocks

Product Details

• Result of tight fit on support
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Test spectrum
  Service life test category 2, bogie-mounted
• Test duration per axis
  5 h
• Shock form
  Half-sine
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Result of temperature-rise test
  Test passed
• Conductor cross section short circuit testing
  16 mm²
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Static insulating material application in cold
  -60 °C
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• End cover width
  2.2 mm
• Width
  12.2 mm
• Length
  55.5 mm
• Note
  Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
• Conductor cross section solid min.
  1.5 mm²
• ECLASS 11.0
  27141120
Bending test rotation speed
10 rpm
Acceleration
30g
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
Short circuit stability result
Test passed
Short-time current
1.92 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Surface flammability NFPA 130 (ASTM E 162)
passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 35/7,5
55 mm
Stripping length
14 mm
Tightening torque max
3 Nm
Connection in acc. with standard
CUL
Height NS 35/15
62.5 mm
Connection method
Screw connection
Conductor cross section AWG max.
4
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Screw thread
M5
Tightening torque, min
2.5 Nm
Conductor cross section solid max.
25 mm²
Conductor cross section AWG min.
16
Conductor cross section flexible max.
25 mm²
Conductor cross section flexible min.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
2 conductors with same cross section, solid max.
6 mm²
2 conductors with same cross section, stranded min.
1 mm²
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
2 conductors with same cross section, solid min.
1 mm²
Height
54.4 mm
Min. AWG conductor cross section, flexible
16
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
Max. AWG conductor cross section, flexible
4
Conductor cross section flexible, with ferrule with plastic sleeve max.
16 mm²
Potentials
1
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
2.43 W
Open side panel
Yes
Power frequency withstand voltage setpoint
2.2 kV
Bending test turns
135
Tight fit on carrier
NS 32/NS 35
Number of connections
2
Insulating material
PA
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Area of application
Railway industry
Overvoltage category
III
Nominal voltage UN
1000 V
Result of power-frequency withstand voltage test
Test passed
Conductor cross section tensile test
25 mm²
Tensile test result
Test passed
Tractive force setpoint
135 N
Nominal cross section
16 mm²
Insulating material group
I
Back of the hand protection
guaranteed
Surge voltage test setpoint
9.8 kV
Result of flexion and pull-out test
Test passed
Number of levels
1
Color
green
Degree of pollution
3
Maximum load current
101 A (with 25 mm² conductor cross section)
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
1.5 mm² / 0.4 kg
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
1 mm²
Internal cylindrical gage
A7
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141100
ECLASS 4.1
27141100
ETIM 7.0
EC000897
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Nominal current IN
76 A
Finger protection
guaranteed
Shock protection test specification
IEC 60529:2001-02
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
10 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Flammability rating according to UL 94
V0
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.75 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
6 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ETIM 4.0
EC000897
ECLASS 6.0
27141100
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 18.0
39121410
2 conductors with same cross section, stranded max.
6 mm²