3038875 Phoenix Contact Terminal Blocks

Product Details

• Degree of pollution
  3
• Maximum load current
  20 A (with 6 mm² conductor cross section)
• Nominal cross section
  4 mm²
• Overvoltage category
  III
• Nominal voltage UN
  400 V
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test rotation speed
  10 rpm
• Conductor cross section tensile test
  6 mm²
• Result of voltage-drop test
  Test passed
• Conductor cross section short circuit testing
  2.5 mm²
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test spectrum
  Service life test category 2, bogie-mounted
• Test duration per axis
  5 h
• Shock duration
  18 ms
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Static insulating material application in cold
  -60 °C
• End cover width
  2.2 mm
• Length
  61.5 mm
• Conductor cross section AWG min.
  28
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Connection method
Spring-cage connection
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 4.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Number of levels
1
Insulating material
PA
Rated surge voltage
6 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Maximum power dissipation for nominal condition
1.02 W
Color
gray
Area of application
Railway industry
Connection in acc. with standard
CSA
Nominal current IN
20 A
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Short circuit stability result
Test passed
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Acceleration
30g
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
6.2 mm
Conductor cross section solid min.
0.08 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141100
ECLASS 7.0
27141126
ETIM 3.0
EC000902
ETIM 7.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Number of connections
2
Flammability rating according to UL 94
V0
Insulating material group
I
Open side panel
No
Result of surge voltage test
Test passed
Surge voltage test setpoint
7.3 kV
Result of tight fit on support
Test passed
Tractive force setpoint
80 N
Short-time current
0.3 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
36.5 mm
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Stripping length
8 mm ... 10 mm
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 5.0
27141100
ECLASS 9.0
27141126
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Tensile test result
Test passed
Setpoint
1 N
Result of aging test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Internal cylindrical gage
A4
ECLASS 10.0.1
27141126
ECLASS 5.1
27141100
ETIM 6.0
EC000902
UNSPSC 13.2
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
44 mm
Conductor cross section AWG max.
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ECLASS 4.1
27141100
ETIM 2.0
EC000902
UNSPSC 11
39121410
UNSPSC 20.0
39121410