3038532 Phoenix Contact Terminal Blocks

Product Details

• Insulating material
  PA
• Rated surge voltage
  6 kV
• Overvoltage category
  III
• Open side panel
  Yes
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• ASD level
  6.12 (m/s2)2/Hz
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Static insulating material application in cold
  -60 °C
• Number of connections
  6
• Flammability rating according to UL 94
  V0
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock form
  Half-sine
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Connection method
  Spring-cage connection
• Conductor cross section AWG max.
  12
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  2.5 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141141
ECLASS 5.1
27141100
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Color
green-yellow
Insulating material group
I
Back of the hand protection
guaranteed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible max.
2.5 mm²
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141100
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Number of levels
2
Area of application
Railway industry
Connection in acc. with standard
CSA
Finger protection
guaranteed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
91.5 mm
Note
Please observe the current carrying capacity of the DIN rails.
Conductor cross section solid min.
0.08 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Stripping length
8 mm ... 10 mm
ECLASS 10.0.1
27141141
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Nominal cross section
2.5 mm²
Degree of pollution
3
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
5.2 mm
Height NS 35/15
55 mm
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 7.0
27141141
ETIM 4.0
EC000897
ETIM 6.0
EC000901
UNSPSC 11
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 9.0
27141141
ETIM 7.0
EC000901
UNSPSC 19.0
39121410