3038451 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Area of application
  Railway industry
• Nominal current IN
  20 A (with 4 mm² conductor cross section)
• Back of the hand protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Bending test conductor cross section/weight
  0.08 mm² / 0.1 kg
• Result of temperature-rise test
  Test passed
• Result of aging test
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Static insulating material application in cold
  -60 °C
• Number of connections
  4
• Rated surge voltage
  6 kV
• Insulating material group
  I
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Surge voltage test setpoint
  7.3 kV
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tractive force setpoint
  60 N
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/15
44 mm
Conductor cross section solid min.
0.08 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000902
Color
gray
Overvoltage category
III
Nominal voltage UN
400 V (voltage is determined by the plug used)
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Conductor cross section tensile test
4 mm²
Setpoint
1 N
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
84 mm
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG max.
12
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 9.0
27141126
ETIM 2.0
EC000902
UNSPSC 13.2
39121410
Number of levels
1
Flammability rating according to UL 94
V0
Connection in acc. with standard
CSA
Open side panel
Yes
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Requirements, voltage drop
≤ 6,4 mV
Result of thermal test
Test passed
Acceleration
30g
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Connection method
Spring-cage connection
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141126
ECLASS 5.1
27141100
ETIM 7.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Insulating material
PA
Degree of pollution
3
Maximum load current
20 A (with 4 mm² conductor cross section)
Maximum power dissipation for nominal condition
0.77 W
Power frequency withstand voltage setpoint
1.89 kV
Tensile test result
Test passed
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
2.5 mm²
Short-time current
0.3 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
5.2 mm
Conductor cross section AWG min.
28
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 5.0
27141100
ETIM 3.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height NS 35/7,5
36.5 mm
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Stripping length
8 mm ... 10 mm
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 7.0
27141126
ETIM 6.0
EC000902
UNSPSC 11
39121410
UNSPSC 21.0
39121410
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410