3036440 Phoenix Contact Terminal Blocks

Product Details

• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• ECLASS 4.0
  27141100
• ETIM 6.0
  EC000901
• UNSPSC 13.2
  39121410
• Connection in acc. with standard
  CSA
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• ECLASS 6.0
  27141100
• UNSPSC 20.0
  39121410
• Width
  6.2 mm
• Connection
  1 level
• ETIM 2.0
  EC000901
• UNSPSC 7.0901
  39121410
• Nominal cross section
  4 mm²
• Rated surge voltage
  8 kV
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
Length
64.5 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
4 mm²
Max. AWG conductor cross section, flexible
12
Ambient temperature (actuation)
-5 °C ... 70 °C
Number of levels
1
Flammability rating according to UL 94
V0
Open side panel
Yes
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
50.5 mm
Conductor cross section solid min.
0.08 mm²
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ECLASS 7.0
27141141
ETIM 3.0
EC000901
UNSPSC 6.01
30211811
ETIM 7.0
EC000901
Color
green-yellow
Insulating material group
I
Finger protection
guaranteed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
43 mm
Connection method
Spring-cage connection
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Internal cylindrical gage
A4
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141141
ECLASS 5.1
27141100
ECLASS 9.0
27141141
ETIM 4.0
EC000901
UNSPSC 11
39121410
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Number of connections
2
Degree of pollution
3
Back of the hand protection
guaranteed
Min. AWG conductor cross section, flexible
28
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Acceleration
30g
Test directions
X-, Y- and Z-axis (pos. and neg.)
ECLASS 10.0.1
27141141
ECLASS 5.0
27141100
Shock duration
18 ms
Insulating material
PA
Overvoltage category
III
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
10
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
Static insulating material application in cold
-60 °C
Note
Please observe the current carrying capacity of the DIN rails.