3035686 Phoenix Contact Terminal Blocks

Product Details

• Conductor cross section AWG max.
  8
• Potentials
  1
• Color
  gray
• Finger protection
  guaranteed
• Nominal cross section
  6 mm²
• Degree of pollution
  3
• Insulating material group
  I
• Nominal current IN
  1.3 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Height NS 35/7,5
  60 mm
• Connection method
  Push-in connection
• Conductor cross section flexible min.
  0.5 mm²
• Max. AWG conductor cross section, flexible
  10
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  6 mm²
• Connection cross sections directly pluggable
  1 mm² 10 mm²
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Number of levels
  1
• Number of connections
  2
• Rated surge voltage
  8 kV
• Maximum power dissipation for nominal condition
  1.31 W
Nominal voltage UN
1000 V
Result of surge voltage test
Test passed
Tensile test result
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of tight fit on support
Test passed
Result of aging test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Note
Measured with diode and cover per terminal block.
Insulating material
PA
Flammability rating according to UL 94
V0
Setpoint
5 N
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section solid min.
1 mm²
Connection
1 level
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A5
Permissible humidity (storage/transport)
30 % ... 70 %
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27141127
ETIM 4.0
EC000903
ETIM 7.0
EC000903
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Tight fit on carrier
NS 35
ECLASS 4.0
27141100
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27141100
ECLASS 9.0
27141127
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
ASD level
6.12 (m/s2)2/Hz
Test spectrum
Service life test category 2, bogie-mounted
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
100.8 mm
Conductor cross section flexible max.
6 mm²
UNSPSC 12.01
39121410
Result of flexion and pull-out test
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
8.2 mm
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Conductor cross section solid max.
10 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Open side panel
Yes
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of shocks per direction
3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Test duration per axis
5 h
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height
60.1 mm
Conductor cross section AWG min.
20
Maximum load current
3 A (the maximum current is determined by the diode)
Oscillation, broadband noise test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
ECLASS 5.1
27141100
ECLASS 7.0
27141127
ETIM 6.0
EC000903
UNSPSC 11
39121410
Overvoltage category
III
Proof of thermal characteristics (needle flame) effective duration
30 s
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.0
27141100
Back of the hand protection
guaranteed
Height NS 35/15
67.5 mm
ECLASS 11.0
27141127
ETIM 3.0
EC000897
UNSPSC 20.0
39121410
ECLASS 4.1
27141100
Stripping length
12 mm
Ambient temperature (actuation)
-5 °C ... 70 °C