3024407 Phoenix Contact Terminal Blocks
Part#:3024407
Manufacturer:Phoenix Contact
Category:Terminal Blocks
Product Lifecycle:Active
Get a quick Quote!
Test disconnect terminal block, with slide, connection method: Screw connection, cross section: 0.2 mm² - 4 mm² , AWG: 24 - 12, width: 6.2 mm, mounting type: NS 35/7,5, NS 35/15, NS 32, color: blue
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Power Resources International site. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3024407 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- UNSPSC 13.2 39121410
- UNSPSC 21.0 39121410
- ECLASS 7.0 27141126
- UNSPSC 7.0901 39121410
- Nominal cross section 4 mm²
- Overvoltage category III
- Number of connections 2
- Degree of pollution 3
- Open side panel Yes
- Nominal current IN 26 A
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Height NS 35/7,5 40 mm
- Tightening torque, min 0.6 Nm
- Connection in acc. with standard CSA
- Min. AWG conductor cross section, flexible 24
- Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 0.25 mm²
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.1 27141100
- ETIM 3.0 EC000902
- ETIM 7.0 EC000902
- UNSPSC 20.0 39121410
- Potentials 1
- Insulating material PA
- Maximum power dissipation for nominal condition 1.02 W
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Length 56.5 mm
- Stripping length 7 mm
- Connection method Screw connection
- Conductor cross section AWG max. 12
- Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm²
- 2 conductors with same cross section, stranded min. 0.2 mm²
- 2 conductors with same cross section, stranded max. 1.5 mm²
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 5.0 27141100
- ECLASS 4.0 27141100
- ETIM 6.0 EC000902
- UNSPSC 11 39121410
- UNSPSC 12.01 39121410
- Color blue
- Flammability rating according to UL 94 V0
- Nominal voltage UN 400 V
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Surface flammability NFPA 130 (ASTM E 162) passed
- End cover width 1 mm
- Height NS 32 45 mm
- Note Terminal point
- Conductor cross section AWG min. 24
- Conductor cross section flexible min. 0.2 mm²
- Max. AWG conductor cross section, flexible 12
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 2.5 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 5.1 27141100
- Number of levels 1
- Rated surge voltage 6 kV
- Insulating material group I
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Width 6.2 mm
- Connection 1 level
- Tightening torque max 0.8 Nm
- Conductor cross section solid max. 4 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm²
- 2 conductors with same cross section, solid min. 0.2 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 1.5 mm²
- ECLASS 10.0.1 27141126
- ECLASS 9.0 27141126
- UNSPSC 6.01 30211811
- UNSPSC 18.0 39121410
- Maximum load current 26 A (with 4 mm² conductor cross section)
- Static insulating material application in cold -60 °C
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Height NS 35/15 47.5 mm
- Screw thread M3
- Conductor cross section solid min. 0.2 mm²
- Conductor cross section flexible max. 4 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm²
- 2 conductors with same cross section, solid max. 1.5 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 11.0 27141126
- ECLASS 6.0 27141100
- ETIM 2.0 EC000902
- ETIM 4.0 EC000902
- UNSPSC 19.0 39121410
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Manufacturer warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Need more details?
Feel free to chat with us
What can I help you find today?