3005837 Phoenix Contact Terminal Blocks

Product Details

• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• China RoHS
  Environmentally Friendly Use Period = 50 years
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  0.5 mm²
• ECLASS 4.1
  27141100
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Color
  gray
• Insulating material group
  I
• Open side panel
  Yes
• Power frequency withstand voltage setpoint
  1.89 kV
• Tensile test result
  Test passed
• Short circuit stability result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Potentials
  1
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  0.56 W
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Result of voltage-drop test
  Test passed
Nominal current IN
17.5 A
Nominal voltage UN
500 V
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Result of temperature-rise test
Test passed
Number of levels
1
Degree of pollution
3
Nominal cross section
1.5 mm²
Insulating material
PA
Overvoltage category
III
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 32/NS 35
Short-time current
0.18 kA
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Rated surge voltage
6 kV
Maximum load current
17.5 A (with 1.5 mm² conductor cross section)
Finger protection
guaranteed
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Number of connections
2
Proof of thermal characteristics (needle flame) effective duration
30 s
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
49.5 mm
Tightening torque max
0.25 Nm
Conductor cross section AWG max.
16
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Internal cylindrical gage
A1
ECLASS 10.0.1
27141120
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible max.
1.5 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
ECLASS 11.0
27141120
ETIM 2.0
EC000897
ECLASS 9.0
27141120
UNSPSC 18.0
39121410
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
4.2 mm
Height NS 35/7,5
42 mm
Tightening torque, min
0.22 Nm
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
0.34 mm²
Stripping length
7 mm
Max. AWG conductor cross section, flexible
16
2 conductors with same cross section, stranded max.
0.75 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
End cover width
1.5 mm
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Surface flammability NFPA 130 (ASTM E 162)
passed
2 conductors with same cross section, solid min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
0.75 mm²
ECLASS 5.0
27141100
UNSPSC 11
39121410
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Setpoint
1 N
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
42.5 mm
Connection method
Screw connection
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG min.
26
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Conductor cross section short circuit testing
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 7.0
27141120
ETIM 7.0
EC000897
ETIM 6.0
EC000897
ETIM 4.0
EC000897
UNSPSC 19.0
39121410
Result of thermal test
Test passed
UNSPSC 21.0
39121410
ECLASS 5.1
27141100
Screw thread
M2
Connection in acc. with standard
CUL
Conductor cross section flexible, with ferrule without plastic sleeve max.
0.75 mm²
2 conductors with same cross section, solid max.
0.75 mm²
Height NS 32
47 mm
Conductor cross section flexible min.
0.14 mm²
UNSPSC 12.01
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3