3005109 Phoenix Contact Terminal Blocks

Product Details

• Rated operating voltage
  250 V
• Connection in acc. with standard
  CSA
• Back of the hand protection
  guaranteed
• Surge voltage test setpoint
  4.8 kV
• Compatibitity between modular fuse terminal block and fuse insert
  Test passed
• Result of flexion and pull-out test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Acceleration
  5g
• ASD level
  1.857 (m/s2)2/Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Nominal cross section
  16 mm²
• Rated surge voltage
  4 kV
• Color
  black
• Degree of pollution
  3
• Fuse type
  Glass / ceramics / ...
• Finger protection
  guaranteed
• Number of connections
  2
• Flammability rating according to UL 94
  V0
Insulating material group
I
Nominal current IN
10 A
Fuse
G / 5 x 20
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Contact resistance
Test passed
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Result of thermal test
Test passed
Shock test result
Test passed
Shock form
Half-sine
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
64.7 mm
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Number of levels
1
Insulating material
PA
Maximum power dissipation for nominal condition
2.43 W
Maximum load current
10 A
Open side panel
No
Number of positions
1
Note
The current is determined by the fuse used, the voltage by the fuse or selected light indicator.
Power frequency withstand voltage setpoint
1.5 kV
Bending test turns
135
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid max.
16 mm²
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
2 conductors with same cross section, solid max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
10 mm²
Tightening torque max
1.8 Nm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ECLASS 6.0
27141100
UNSPSC 11
39121411
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Overvoltage category
III
Nominal voltage UN
500 V (As a fuse terminal block)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height NS 35/7,5
57.2 mm
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Cross section with insertion bridge, solid max.
10 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.5 mm²
Stripping length
11 mm
Tightening torque, min
1.5 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27141100
ECLASS 7.0
27141116
ETIM 4.0
EC000899
UNSPSC 12.01
39121411
UNSPSC 19.0
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Test duration per axis
5 h
Shock duration
30 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
62 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Cross section with insertion bridge, stranded max.
10 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Connection method
Screw connection
Screw thread
M4
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141116
ECLASS 5.1
27141100
ETIM 2.0
EC000899
UNSPSC 7.0901
39121411
ETIM 6.0
EC000899
UNSPSC 20.0
39121410
Width
12 mm
Height NS 32
62.2 mm
Conductor cross section flexible max.
16 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
2 conductors with same cross section, solid min.
0.5 mm²
2 conductors with same cross section, stranded max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
4 mm²
Internal cylindrical gage
B6
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141116
ECLASS 4.0
27141100
ECLASS 9.0
27141116
ETIM 3.0
EC000899
UNSPSC 6.01
30211812
ETIM 7.0
EC000899
UNSPSC 21.0
39121410
Result of temperature-rise test
Test passed