3002983 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Maximum total current
  26 A
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Short-time current
  0.3 kA
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Number of shocks per direction
  3
• Shock form
  Half-sine
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Stripping length
  8 mm ... 10 mm
• Conductor cross section flexible max.
  1.5 mm²
• Min. AWG conductor cross section, flexible
  24
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 5.1
  27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Number of connections
18
Rated surge voltage
6 kV
Maximum load current
22 A
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Setpoint
1 N
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Shock test result
Test passed
Test duration per axis
0.0013888888889 h
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Internal cylindrical gage
A1 / B1
ECLASS 4.0
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Overvoltage category
III
Open side panel
No
Result of surge voltage test
Test passed
Nominal cross section
1.5 mm²
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 15
27.4 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section AWG max.
14
Max. AWG conductor cross section, flexible
14
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
Number of levels
1
Color
black/yellow
Degree of pollution
3
Nominal current IN
17.5 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35/NS 15
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
37.4 mm
Conductor cross section AWG min.
26
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141120
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Insulating material
PA
Maximum power dissipation for nominal condition
0.56 W
Nominal voltage UN
500 V
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of temperature-rise test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
21.6 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ETIM 2.0
EC000897
ETIM 3.0
EC000897
UNSPSC 18.0
39121410