3001048 Phoenix Contact Terminal Blocks

Product Details

• Color
  blue
• Degree of pollution
  3
• Shock protection test specification
  IEC 60529:2001-02
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test rotation speed
  10 rpm
• Tight fit on carrier
  NS 32/NS 35
• Conductor cross section short circuit testing
  4 mm²
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• End cover width
  1.5 mm
• Connection method
  Screw connection
• Conductor cross section solid max.
  4 mm²
• Potentials
  1
• Rated surge voltage
  8 kV
• Nominal current IN
  24 A
• Back of the hand protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
42 mm
Tightening torque, min
0.6 Nm
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
24
2 conductors with same cross section, solid max.
1 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.1
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
Insulating material
PA
Nominal voltage UN
690 V
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Setpoint
1 N
Short circuit stability result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
6.2 mm
Height NS 35/15
49.5 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
30
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded max.
1 mm²
Connection in acc. with standard
CSA
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 4.0
27141100
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Number of levels
1
Flammability rating according to UL 94
V0
Insulating material group
I
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 32
47 mm
Screw thread
M3
Max. AWG conductor cross section, flexible
14
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, stranded min.
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Number of connections
2
Overvoltage category
III
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
42.5 mm
Stripping length
7 mm
Tightening torque max
0.8 Nm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Internal cylindrical gage
A3
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410