2986957 Phoenix Contact Electrical Safety Devices

Product Details

• Width
  17.5 mm
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Typ. starting time with Us
  50 ms
• Maximum switching frequency
  0.5 Hz
• Minimum switching voltage
  15 V AC/DC (N/O contact / N/C contact)
• Maximum interrupting rating (inductive load)
  72 W (24 V DC, τ = 40 ms, N/C contact: 2.4 W)
• Relay type
  Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
• Net weight
  137.48 g
• Min. degree of protection of inst. location
  IP54
• Conductor cross-section AWG
  24 ... 16
• Designation
  Air clearances and creepage distances between the power circuits
• Standards/regulations
  DIN EN 50178/VDE 0160
• Shock
  15g
• ECLASS 11.0
  27371819
• ECLASS 5.1
  27371900
• ECLASS 7.0
  27371819
• ETIM 6.0
  EC001449
• UNSPSC 13.2
  39121501
• UNSPSC 21.0
  39122205
Depth
114.5 mm
Recovery time
1 s
Contact type
2 enabling current paths
Sq. Total current
50 A2 (observe derating)
Mechanical service life
10x 106 cycles
pluggable
Yes
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Stripping length
8 mm
Performance level (PL)
e (Diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 99%)
Degree of pollution
2
ECLASS 10.0.1
27371819
ECLASS 6.0
27371800
ETIM 7.0
EC001449
UNSPSC 12.01
39121501
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-20 °C ... 55 °C (observe derating)
Input voltage range
20.4 V DC ... 26.4 V DC
Inrush current
max. 100 mA
Operating voltage display
1 x yellow LED
Filter time
max. 5 ms (at A1 in the event of voltage dips at Us)
Maximum inrush current
5 A (N/O contact)
Inrush current, minimum
5 mA (N/O contact / N/C contact)
Nominal operating mode
100% operating factor
Mounting position
any
Connection method
Push-in connection
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Safety Integrity Level (SIL)
3
Safety Integrity Level Claim Limit (SIL CL)
3 (max. 10% of the entire SIL; diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 90% )
Conformance
CE-compliant
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
40020600
ECLASS 9.0
27371819
UNSPSC 6.01
30211901
UNSPSC 7.0901
39121501
Height
112 mm
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Rated control circuit supply voltage US
24 V DC -15 % / +10 %
Power consumption at US
typ. 1.32 W
Typical release time
50 ms
Maximum switching voltage
250 V AC/DC (N/O contact / N/C contact, observe the load curve)
Contact material
AgCuNi, + 0.2 µm Au
Switching capacity
min. 75 mW
Output fuse
10 A gL/gG (N/O contact)
Mounting type
DIN rail mounting
Housing color
yellow
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Category
4 (Diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 99%)
Rated surge voltage/insulation
Safe isolation, reinforced insulation 6 kV between the control circuits (A1/A2), (31/32), (13/14, 23/24)
Vibration (operation)
10 Hz ... 150 Hz, 2g
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27371900
ETIM 2.0
EC001449
ETIM 4.0
EC001449
UNSPSC 18.0
39122205
UNSPSC 19.0
39122205
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Rated control supply current IS
typ. 55 mA
Protective circuit
Surge protection Suppressor diode, 33 V (A1 - A2)
Limiting continuous current
5 A (N/O contact, pay attention to the derating)
Interrupting rating (ohmic load) max.
120 W (24 V DC, τ = 0 ms, N/C contact: 2.4 W)
Degree of protection
IP20
Housing material
PBT
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Stop category
0
Rated insulation voltage
250 V
Overvoltage category
III
ECLASS 4.1
40020600
ETIM 3.0
EC001449
UNSPSC 11
39121501
UNSPSC 20.0
39122205