2986575 Phoenix Contact Electrical Safety Devices

Product Details

• Vibration (operation)
  10 Hz ... 150 Hz, 2g
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -20 °C ... 55 °C (observe derating)
• Inrush current
  max. 100 mA
• Typical release time
  50 ms
• Maximum switching voltage
  250 V AC/DC (N/O contact / N/C contact, observe the load curve)
• Maximum inrush current
  5 A (N/O contact)
• Relay type
  Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
• Net weight
  136.3 g
• Min. degree of protection of inst. location
  IP54
• Housing color
  yellow
• Conductor cross section solid
  0.2 mm² ... 2.5 mm²
• Stop category
  0
• Category
  1 (Diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 90 %)
• Rated insulation voltage
  250 V AC
• ECLASS 11.0
  27371819
• Height
  99 mm
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Recovery time
  1 s
• Operating voltage display
  1 x yellow LED
Contact material
AgCuNi, + 0.2 µm Au
Interrupting rating (ohmic load) max.
120 W (24 V DC, τ = 0 ms, N/C contact: 2.4 W)
Output fuse
10 A gL/gG (N/O contact)
Mounting position
any
Housing material
PBT
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Stripping length
7 mm
Safety Integrity Level (SIL)
2
Rated surge voltage/insulation
Safe isolation, reinforced insulation 6 kV between the control circuits (A1/A2), (31/32), (13/14, 23/24)
Conformance
CE-compliant
ECLASS 10.0.1
27371819
ECLASS 4.0
40020600
ECLASS 6.0
27371800
ETIM 4.0
EC001449
UNSPSC 7.0901
39121501
UNSPSC 13.2
39121501
Width
17.5 mm
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Rated control circuit supply voltage US
24 V DC -15 % / +10 %
Typ. starting time with Us
50 ms
Protective circuit
Surge protection Suppressor diode, 33 V (A1 - A2)
Limiting continuous current
5 A (N/O contact, pay attention to the derating)
Maximum interrupting rating (inductive load)
72 W (24 V DC, τ = 40 ms, N/C contact: 2.4 W)
Nominal operating mode
100% operating factor
Degree of protection
IP20
Connection method
Screw connection
Conductor cross-section AWG
24 ... 12
Designation
Air clearances and creepage distances between the power circuits
Safety Integrity Level Claim Limit (SIL CL)
1 (max. 10% of the entire SIL; diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 90% )
Overvoltage category
III
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
40020600
ECLASS 5.0
27371900
ECLASS 9.0
27371819
UNSPSC 6.01
30211901
UNSPSC 19.0
39122205
UNSPSC 20.0
39122205
Depth
114.5 mm
Rated control supply current IS
typ. 55 mA
Power consumption at US
typ. 1.32 W
Maximum switching frequency
0.5 Hz
Inrush current, minimum
5 mA (N/O contact / N/C contact)
Sq. Total current
50 A2 (observe derating)
Mechanical service life
10x 106 cycles
Mounting type
DIN rail mounting
pluggable
Yes
Screw thread
M3
Performance level (PL)
c (Diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 90 %)
Standards/regulations
DIN EN 50178/VDE 0160
Degree of pollution
2
Shock
15g
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27371819
ETIM 3.0
EC001449
ETIM 6.0
EC001449
UNSPSC 11
39121501
UNSPSC 21.0
39122205
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Input voltage range
20.4 V DC ... 26.4 V DC
Filter time
max. 5 ms (at A1 in the event of voltage dips at Us)
Contact type
2 enabling current paths
Minimum switching voltage
15 V AC/DC (N/O contact / N/C contact)
Switching capacity
min. 75 mW
ECLASS 5.1
27371900
ETIM 2.0
EC001449
ETIM 7.0
EC001449
UNSPSC 12.01
39121501
UNSPSC 18.0
39122205