2986096 Phoenix Contact Electrical Safety Devices

Product Details

• Depth
  114.5 mm
• Max. permissible humidity (storage/transport)
  75 % (On average, 85 % occasionally)
• Mechanical service life
  10x 106 cycles
• Recovery time
  < 10 s
• Net weight
  140 g
• Degree of protection
  IP20
• Conductor cross-section AWG
  24 ... 12
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Air pressure (operation)
  70 kPa ... 108 kPa (up to 3000 m above sea level)
• Maximum altitude
  max. 2000 m (See Appendix "Using PSR-TRISAFE modules at altitudes greater than 2000 m above sea level")
• Status display
  4 x green LEDs
• Switching current
  min. 3 mA (as of HW 03)
• Output fuse
  6 A (gL / gG)
• Type of protection
  Yes, within the scope of the operating voltage limits
• Housing material
  Polyamide PA non-reinforced
• Conductor cross section solid
  0.2 mm² ... 2.5 mm²
• Stripping length
  7 mm
• Safety Integrity Level Claim Limit (SIL CL)
  1 (1-channel parameterization)
• Overvoltage category
  III
• ECLASS 10.0.1
  27371819
ECLASS 11.0
27371819
ECLASS 9.0
27371819
UNSPSC 12.01
39121501
UNSPSC 20.0
39122205
Width
22.5 mm
Ambient temperature (storage/transport)
-20 °C ... 70 °C
Protective circuit
Yes, within the scope of the operating voltage limits
Number of outputs
4
Limiting continuous current
50 mA
Voltage
24 V DC (Supply via A1/A2)
Mounting position
On horizontal DIN rail
Housing color
yellow
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Torque
0.5 Nm ... 0.6 Nm
Performance level (PL)
c (1-channel parameterization)
Vibration (operation)
2g
ECLASS 4.0
27371100
ECLASS 5.0
27242700
ETIM 4.0
EC001417
UNSPSC 7.0901
39121501
UNSPSC 18.0
39122205
Ambient temperature (operation)
-20 °C ... 55 °C (see to derating)
Max. permissible relative humidity (operation)
75 % (On average, 85 % occasionally)
Rated control circuit supply voltage US
24 V DC (Electrical supply via PSR-TBUS)
Output description
Digital
Contact material
AgSnO2 (From HW03)AgCuNi + 0.2 - 0.4 μm Au (up to HW02)
Contact type
4 relay output contacts
Switching capacity
min. 60 mW
Response time
max. 50 ms
Mounting type
DIN rail mounting
Connection method
Screw connection
Screw thread
M3
Rated insulation voltage
250 V AC
Pollution degree
2
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27242700
ECLASS 7.0
27371819
ETIM 6.0
EC001449
UNSPSC 13.2
39122329
Height
99 mm
Air pressure (storage/transport)
66 kPa ... 108 kPa (up to 3500 m above sea level)
Rated control supply current IS
Electrical supply via PSR-TBUS
Switching voltage
min. 12 V AC/DC (as of HW 03)
Short-circuit protection
Yes
Nominal operating mode
100% operating factor
Min. degree of protection of inst. location
IP54
pluggable
Yes
Stop category
0
Standards/regulations
DIN EN 50178
Rated surge voltage/insulation
4 kV / basic insulation between output contact current paths (13/14, 23/24, 33/34, 43/44); 6 kV / safe isolation, reinforced insulation between output contact current paths (13/14, 23/24, 33/34, 43/44) and the other circuits
Shock (operation)
10g (Δt = 11 ms, three shocks in each space direction)
ECLASS 6.0
27371800
ETIM 3.0
EC001449
UNSPSC 11
39121501
UNSPSC 19.0
39122205
Safety Integrity Level (SIL)
max. 3 (Reference IEC 61508)
Designation
Air clearances and creepage distances between the power circuits
Category
1 (1-channel parameterization)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27371100
ETIM 7.0
EC001449
UNSPSC 6.01
30211901
UNSPSC 21.0
39122205