2986025 Phoenix Contact Electrical Safety Devices
Part#:2986025
Manufacturer:Phoenix Contact
Category:Electrical Safety Devices
Product Lifecycle:Active
Get a quick Quote!
Freely configurable safety module, with 20 safe inputs and 4 safe outputs, 4 signal, 2 clock, and 2 ground switching outputs; can be extended using additional I/O modules, up to SILCL 3, Cat. 4/PL e, SIL 3, EN 50156, pluggable Push-in terminal block
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at Power Resources International site. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2986025 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Air pressure (storage/transport) 66 kPa ... 108 kPa (up to 3500 m above sea level)
- Height 112 mm
- Ambient temperature (storage/transport) -20 °C ... 70 °C
- Maximum altitude max. 2000 m (See Appendix "Using PSR-TRISAFE modules at altitudes greater than 2000 m above sea level")
- Status display 4 x LED green (1 LED per output)
- Protective circuit Yes, within the scope of the operating voltage limits
- Input voltage range "1" signal 11 V DC ... 30 V DC
- Leakage current max. 2 mA
- Note on protection circuit Yes, within the scope of the operating voltage limits
- Recovery time < 10 s
- Mounting type DIN rail mounting
- Number of possible extension modules 1 (Max. continuous current via PSR-TBUS: 4 A)
- Connection method Push-in connection
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Pollution degree 2
- ECLASS 4.0 40020600
- ECLASS 7.0 27371819
- ETIM 6.0 EC001449
- UNSPSC 18.0 39122205
- Width 67.5 mm
- Ambient temperature (operation) -20 °C ... 55 °C
- Max. permissible humidity (storage/transport) 75 % (On average, 85 % occasionally)
- Filter time typ. 20 ms (Load-dependent, in the event of voltage dips at US)
- Number of inputs 10 (Two-channel, up to SIL 3)
- Cable length max. 2000 m
- Max. inductive load See "Protective circuit"
- Output description Digital
- Mounting position On horizontal DIN rail
- Min. degree of protection of inst. location IP54
- Housing material Polyamide PA non-reinforced
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Safety Integrity Level (SIL) max. 3 (Reference IEC 61508)
- Safety Integrity Level Claim Limit (SIL CL) 2 (1-channel parameterization)
- Category 2 (1-channel parameterization)
- Vibration (operation) 2g
- ECLASS 4.1 40020600
- ECLASS 5.1 27371900
- ETIM 2.0 EC001449
- ETIM 7.0 EC001449
- UNSPSC 12.01 39121501
- UNSPSC 19.0 39122205
- UNSPSC 21.0 39122205
- Air pressure (operation) 70 kPa ... 108 kPa (up to 3000 m above sea level)
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Max. permissible relative humidity (operation) 75 % (On average, 85 % occasionally)
- Input voltage range "0" signal 0 V DC ... 5 V DC (for safe Off)
- Number of outputs 4
- Short-circuit protection Yes
- Voltage 24 V DC (Supply via 24 V/0 V)
- Housing color yellow
- Conductor cross-section AWG 24 ... 16
- Designation Air clearances and creepage distances between the power circuits
- Shock (operation) 10g (Δt = 11 ms, three shocks in each space direction)
- China RoHS Environmentally Friendly Use Period = 50 years
- ETIM 3.0 EC001449
- UNSPSC 6.01 30211901
- Depth 114.5 mm
- Rated control circuit supply voltage US 24 V DC (A1/A2)
- Limiting continuous current 100 mA
- Current consumption typ. 4 mA
- Max. capacitive load max. 1 µF (Electronic components)
- Nominal operating mode 100% operating factor
- Net weight 154 g
- pluggable Yes
- Performance level (PL) d (1-channel parameterization)
- Standards/regulations DIN EN 50178
- REACh SVHC Lead 7439-92-1
- ECLASS 10.0.1 27371819
- ECLASS 6.0 27371800
- ETIM 4.0 EC001449
- UNSPSC 11 39121501
- UNSPSC 20.0 39122205
- Rated control supply current IS typ. 110 mA
- Description of the input Digital, type HTL
- Nominal output voltage 24 V DC (Supply via 24 V/0 V)
- Output voltage < 5 V (Low state)
- Nominal output voltage range 18 V DC ... 30 V DC (Incl. all tolerances, incl. residual ripple)
- Test pulses < 1 ms
- Response time max. 30 ms (plus response time of PSR-TS-SDOR4)
- Degree of protection IP20
- Number of possible safe extension modules 10 (Max. continuous current via PSR-TBUS: 4 A)
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Stripping length 8 mm
- Stop category 0
- Overvoltage category III
- ECLASS 11.0 27371819
- ECLASS 5.0 27371900
- ECLASS 9.0 27371819
- UNSPSC 7.0901 39121501
- UNSPSC 13.2 39121501
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Manufacturer warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Need more details?
Feel free to chat with us
What can I help you find today?