2981981 Phoenix Contact Electrical Safety Devices

Product Details

• Height
  112 mm
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Inrush current
  max. 100 mA
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -20 °C ... 55 °C (observe derating)
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Rated control circuit supply voltage US
  24 V DC -15 % / +10 %
• Typical release time
  50 ms
• Maximum switching frequency
  0.5 Hz
• Maximum switching voltage
  250 V AC/DC (N/O contact / N/C contact, observe the load curve)
• Maximum inrush current
  5 A (N/O contact)
• Mechanical service life
  10x 106 cycles
• Relay type
  Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
• Housing material
  PBT
• Conductor cross section solid
  0.2 mm² ... 1.5 mm²
• Designation
  Air clearances and creepage distances between the power circuits
• Safety Integrity Level (SIL)
  3
• Degree of pollution
  2
• ECLASS 4.0
  40020600
• ECLASS 5.1
  27371900
ETIM 2.0
EC001449
ETIM 7.0
EC001449
UNSPSC 11
39121501
UNSPSC 21.0
39122205
Depth
114.5 mm
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Input voltage range
20.4 V DC ... 26.4 V DC
Power consumption at US
typ. 1.32 W
Protective circuit
Surge protection Suppressor diode, 33 V (A1 - A2)
Contact material
AgCuNi, + 0.2 µm Au
Minimum switching voltage
15 V AC/DC (N/O contact / N/C contact)
Interrupting rating (ohmic load) max.
120 W (24 V DC, τ = 0 ms, N/C contact: 2.4 W)
Switching capacity
min. 75 mW
Net weight
99.99 g
Degree of protection
IP20
Connection method
Push-in connection
Conductor cross-section AWG
24 ... 16
Stop category
0
Rated insulation voltage
250 V AC
Shock
15g
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
40020600
ECLASS 7.0
27371819
UNSPSC 12.01
39121501
UNSPSC 19.0
39122205
Mounting position
any
pluggable
Yes
Stripping length
8 mm
Performance level (PL)
e (Diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 99%)
Standards/regulations
DIN EN 50178/VDE 0160
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 10.0.1
27371819
ECLASS 5.0
27371900
ETIM 6.0
EC001449
UNSPSC 20.0
39122205
Width
17.5 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Rated control supply current IS
typ. 55 mA
Typ. starting time with Us
50 ms
Recovery time
1 s
Contact type
1 enabling current path
Inrush current, minimum
5 mA (N/O contact / N/C contact)
Maximum interrupting rating (inductive load)
72 W (24 V DC, τ = 40 ms, N/C contact: 2.4 W)
Nominal operating mode
100% operating factor
Min. degree of protection of inst. location
IP54
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Category
4 (Diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 99%)
Safety Integrity Level Claim Limit (SIL CL)
3 (max. 10% of the entire SIL; diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 90% )
Overvoltage category
III
Conformance
CE-compliant
ECLASS 6.0
27371800
ETIM 3.0
EC001449
UNSPSC 6.01
30211901
UNSPSC 13.2
39121501
Operating voltage display
1 x yellow LED
Filter time
max. 5 ms (at A1 in the event of voltage dips at Us)
Limiting continuous current
5 A (N/O contact, pay attention to the derating)
Sq. Total current
25 A2 (observe derating)
Output fuse
5 A T fuse (N/O contact)
Mounting type
DIN rail mounting
Housing color
yellow
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Rated surge voltage/insulation
Safe isolation, reinforced insulation 6 kV between the control circuits (A1/A2), (21/22), (13/14)
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27371819
ECLASS 9.0
27371819
ETIM 4.0
EC001449
UNSPSC 7.0901
39121501
UNSPSC 18.0
39122205