2981839 Phoenix Contact Electrical Safety Devices

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -40 °C ... 70 °C
• Maximum altitude
  max. 2000 m (Above sea level)
• Height
  114.5 mm
• Ambient temperature (operation)
  -20 °C ... 55 °C
• Rated control circuit supply voltage US
  24 V AC/DC -15 % / +10 %
• Recovery time
  < 500 ms
• Operating voltage display
  1 x green LED
• Maximum switching frequency
  0.5 Hz
• Limiting continuous current
  6 A (N/O contact)
• Inrush current, minimum
  10 mA
• Interrupting rating (ohmic load) max.
  For additional values, see load curve
• Switching capacity according to IEC 60947-5-1
  5 A (24 V (DC13))
• Relay type
  Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
• Mounting type
  DIN rail mounting
• pluggable
  Yes
• Screw thread
  M3
• Designation
  Air clearances and creepage distances between the power circuits
• Category
  1
• Overvoltage category
  III
Conformance
CE-compliant
ECLASS 4.1
27371100
ECLASS 6.0
27371600
ECLASS 7.0
27371601
ETIM 3.0
EC001449
UNSPSC 6.01
30211901
UNSPSC 19.0
39122334
Stripping length
7 mm
Stop category
0
Standards/regulations
DIN EN 50178
Rated surge voltage/insulation
4 kV / Basic isolation, (safe isolation, reinforced insulation and 6 kV between input circuit and enabling current paths.)
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27371819
ECLASS 5.0
27371600
Width
22.5 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Rated control supply current IS
typ. 45 mA
Typ. starting time with Us
typ. 15 ms (when controlled via A1)
Protective circuit
Surge protection Suppressor diode
Contact type
3 enabling current paths
Maximum inrush current
8 A
Switching capacity
min. 50 mW
Maximum interrupting rating (inductive load)
48 W (N/O contact, 24 V DC, τ = 40 ms)
Net weight
126.9 g
Degree of protection
IP20
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross-section AWG
24 ... 12
Safety Integrity Level Claim Limit (SIL CL)
1
UNSPSC 12.01
39121501
Depth
99 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Input voltage range
20.4 V AC/DC ... 26.4 V AC/DC
Power consumption at US
typ. 1.08 W
Minimum switching voltage
5 V AC/DC
Contact material
AgSnO2
Mechanical service life
10x 106 cycles
Nominal operating mode
100% operating factor
Housing material
PBT
Connection method
Screw connection
Torque
0.6 Nm
Performance level (PL)
c
Rated insulation voltage
250 V
Vibration (operation)
10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.)
ECLASS 10.0.1
27371601
ECLASS 4.0
27371100
ECLASS 5.1
27371600
ETIM 4.0
EC001449
ETIM 7.0
EC001437
UNSPSC 7.0901
39121501
UNSPSC 18.0
39122334
UNSPSC 20.0
39122334
Typical release time
typ. 15 ms (when controlled via A1)
Inrush current
typ. 350 mA DC (Δt < 1 µs at Us)
Maximum switching voltage
230 V AC/DC (Observe the load curve)
Sq. Total current
48 A2
Output fuse
10 A gL/gG (N/O contact)
Mounting position
vertical or horizontal
Min. degree of protection of inst. location
IP54
Housing color
yellow
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Safety Integrity Level (SIL)
1
Degree of pollution
2
Shock
15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.)
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 2.0
EC001449
ECLASS 9.0
27371601
ETIM 6.0
EC001437
UNSPSC 11
39121501
UNSPSC 13.2
39121501
UNSPSC 21.0
39122334