2981680 Phoenix Contact Electrical Safety Devices

Product Details

• Switching capacity (360/h cycles)
  6 A (24 V DC)
• Maximum switching voltage
  250 V AC/DC
• Maximum inrush current
  6 A (N/O contact, DC1/AC1)
• Switching capacity min.
  0.4 W
• Output fuse
  10 A gL/gG NEOZED (N/O contact)
• Connection method
  Push-in connection
• Conductor cross-section flexible with ferrule and plastic sleeve
  0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
• Category
  4 (In conjunction with suitable evaluating device)
• REACh SVHC
  Lead 7439-92-1
• ECLASS 5.0
  27371900
• ETIM 4.0
  EC001449
• ETIM 7.0
  EC001449
• UNSPSC 12.01
  39121501
• Ambient temperature (operation)
  -20 °C ... 55 °C
• Ambient temperature (storage/transport)
  -40 °C ... 70 °C
• Typical release time
  10 ms
• Protective circuit
  Surge protection Suppressor diode
• Contact material
  AgSnO2
• Maximum interrupting rating (inductive load)
  48 W (24 V DC, τ = 40 ms)
• Width
  22.5 mm
Depth
114.5 mm
Maximum altitude
max. 2000 m (Above sea level)
Input voltage range in reference to UN
0.9 ... 1.1
Status display
Green LED
Minimum switching voltage
15 V AC/DC
Sq. Total current
72 A2 (ITH2 = I12 + I22 + I32 + I42)
Switching capacity according to IEC 60947-5-1
5 A (DC13)
Net weight
196.5 g
Degree of protection
IP20
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Stop category
0
Performance level (PL)
e (In conjunction with suitable evaluating device)
Overvoltage category
III
ECLASS 11.0
27371819
ECLASS 4.1
40020600
ETIM 2.0
EC001449
ETIM 6.0
EC001449
UNSPSC 20.0
39122205
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Typical response time
10 ms
Typical input current at UN
42 mA
Inrush current, minimum
25 mA
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Nominal operating mode
100% operating factor
pluggable
Yes
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Safety Integrity Level (SIL)
3 (In conjunction with suitable evaluating device)
Degree of pollution
2
ECLASS 4.0
40020600
ECLASS 6.0
27371800
ECLASS 9.0
27371819
UNSPSC 7.0901
39121501
UNSPSC 11
39121501
UNSPSC 19.0
39122205
Height
112 mm
Nominal input voltage UN
24 V DC
Recovery time
1 s
Contact type
4 enabling current paths
Limiting continuous current
6 A (N/O contact, DC1/AC1)
Interrupting rating (ohmic load) max.
144 W (24 V DC, τ = 0 ms, N/C contact 61/62: 72 W)
Mechanical service life
approx. 107 cycles
Mounting position
any
Housing color
yellow
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Designation
Air clearances and creepage distances between the power circuits
Rated insulation voltage
250 V
Standards/regulations
IEC 60947-1
ECLASS 10.0.1
27371819
ECLASS 5.1
27371900
UNSPSC 6.01
30211901
UNSPSC 13.2
39121501
Mounting type
DIN rail mounting
Min. degree of protection of inst. location
IP54
Conductor cross-section AWG
24 ... 16
Stripping length
8 mm
Safety Integrity Level Claim Limit (SIL CL)
3 (In conjunction with suitable evaluating device)
Rated surge voltage/insulation
4 kV / basic isolation (safe isolation, reinforced insulation and 6 kV between input circuit/N/C contacts and enabling current paths).
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27371819
ETIM 3.0
EC001449
UNSPSC 18.0
39122205
UNSPSC 21.0
39122205