2981541 Phoenix Contact Electrical Safety Devices

Product Details

• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Input voltage range in reference to UN
  0.85 ... 1.1
• Recovery time
  1 s
• Typical release time
  12 ms
• Limit frequency
  2 kHz (IN1, IN2)
• Output fuse
  6 A gL
• Relay type
  Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
• Housing color
  yellow
• Conductor cross-section flexible with ferrule without plastic sleeve
  0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
• Conductor cross-section flexible with ferrule and plastic sleeve
  0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
• Category
  4
• Width
  45 mm
• Ambient temperature (operation)
  -20 °C ... 55 °C
• Maximum altitude
  max. 2000 m (Above sea level)
• Contact type
  4 enabling current paths
• Maximum inrush current
  6 A
• Sq. Total current
  42.25 A2 (ITH2 = I12 + I22 + I32 + I42)
• Nominal operating mode
  100% operating factor
• Mounting position
  any
• Min. degree of protection of inst. location
  IP54
pluggable
Yes
Stop category
0
Rated insulation voltage
250 V
ECLASS 11.0
27371811
ECLASS 5.0
27371900
ETIM 3.0
EC001449
ETIM 4.0
EC001449
UNSPSC 12.01
39121501
UNSPSC 20.0
39122331
Mechanical service life
> 50x 106 cycles
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Nominal input voltage UN
24 V DC
Protective circuit
Surge protection Suppressor diode
Maximum switching voltage
250 V AC/DC (when the gold layer is destroyed)
Minimum switching voltage
100 mV AC/DC
Mounting type
DIN rail mounting
Connection method
Push-in connection
Stripping length
8 mm
Safety Integrity Level (SIL)
3
Rated surge voltage/insulation
4 kV / Basic isolation, (safe isolation, reinforced insulation and 6 kV between input circuit and enabling current paths.)
ECLASS 10.0.1
27371811
ECLASS 7.0
27371811
UNSPSC 6.01
30211901
UNSPSC 13.2
39122331
UNSPSC 21.0
39122331
Depth
114.5 mm
Typical response time
15 ms
Voltage at input/start and feedback circuit
approx. 24 V DC
Status display
Green LED
Limiting continuous current
5 A
Switching capacity min.
1 mW
Net weight
369.9 g
Assembly instructions
In rows with zero spacing
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Performance level (PL)
e
Safety Integrity Level Claim Limit (SIL CL)
3
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
40020600
ETIM 2.0
EC001449
ETIM 6.0
EC001448
UNSPSC 19.0
39122331
Height
112 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Typical input current at UN
100 mA
Contact material
AgNi10, + 5 µm Au
Inrush current, minimum
1 mA
Interrupting rating (ohmic load) max.
67 W (24 V DC, τ = 0 ms)
Degree of protection
IP20
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Conductor cross-section AWG
24 ... 16
Designation
Air clearances and creepage distances between the power circuits
Standards/regulations
EN 60664/VDE 0110
Degree of pollution
2
ECLASS 4.0
40020600
ECLASS 6.0
27371800
ETIM 7.0
EC001448
UNSPSC 7.0901
39121501
Overvoltage category
III
ECLASS 5.1
27371900
ECLASS 9.0
27371811
UNSPSC 11
39121501
UNSPSC 18.0
39122331