2981499 Phoenix Contact Electrical Safety Devices

Product Details

• Ambient temperature (operation)
  -20 °C ... 55 °C
• Voltage at input/start and feedback circuit
  approx. 24 V DC
• Recovery time
  1 s
• Interrupting rating (ohmic load) max.
  144 W (24 V DC, τ = 0 ms)
• Relay type
  Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
• Depth
  114.5 mm
• Input voltage range in reference to UN
  0.85 ... 1.1
• Nominal input voltage UN
  24 V DC
• Max. permissible overall conductor resistance
  50 Ω (Input and start circuits at UN)
• Maximum switching voltage
  250 V AC/DC
• Inrush current, minimum
  25 mA
• Output fuse
  10 A gL/gG NEOZED (N/O contact)
• Net weight
  218.55 g
• Min. degree of protection of inst. location
  IP54
• Housing color
  yellow
• Designation
  Air clearances and creepage distances between the power circuits
• Height
  112 mm
• Ambient temperature (storage/transport)
  -40 °C ... 70 °C
• Typical input current at UN
  70 mA
• Contact material
  AgSnO2
Contact type
2 enabling current paths
Stop category
0
UNSPSC 6.01
30211901
Width
22.5 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Maximum altitude
≤ 2000 m (Above sea level)
Typical release time
10 ms
Minimum switching voltage
15 V AC/DC
Maximum inrush current
6 A
Mechanical service life
approx. 107 cycles
Mounting type
DIN rail mounting
pluggable
Yes
Conductor cross-section AWG
24 ... 16
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Category
4 (Undelayed contacts)
Rated insulation voltage
250 V
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27371819
ECLASS 5.0
27371900
ETIM 3.0
EC001449
UNSPSC 11
39121501
UNSPSC 18.0
39122205
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Typical response time
20 ms (manual start)
Limiting continuous current
6 A (N/O contact)
Switching capacity min.
0.4 W
Degree of pollution
2
ECLASS 10.0.1
27371819
ETIM 2.0
EC001449
ECLASS 9.0
27371819
ETIM 7.0
EC001449
UNSPSC 7.0901
39121501
UNSPSC 19.0
39122205
Overvoltage category
III
Maximum interrupting rating (inductive load)
48 W (24 V DC, τ = 40 ms)
Switching capacity (360/h cycles)
6 A (24 V DC)
Mounting position
any
Connection method
Push-in connection
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Stripping length
8 mm
Safety Integrity Level (SIL)
3
ECLASS 4.0
40020600
Safety Integrity Level Claim Limit (SIL CL)
3
Rated surge voltage/insulation
4 kV / Basic isolation, (safe isolation, reinforced insulation and 6 kV between input circuit and enabling current paths.)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
40020600
ECLASS 7.0
27371819
ETIM 4.0
EC001449
UNSPSC 13.2
39121501
UNSPSC 21.0
39122205
Nominal operating mode
100% operating factor
Degree of protection
IP20
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Performance level (PL)
e
Standards/regulations
DIN EN 50178/VDE 0160
ECLASS 6.0
27371800
ECLASS 5.1
27371900
ETIM 6.0
EC001449
UNSPSC 20.0
39122205
UNSPSC 12.01
39121501