2981457 Phoenix Contact Electrical Safety Devices

Product Details

• Width
  40 mm
• Depth
  50.1 mm
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Rated control supply current IS
  typ. 52 mA
• Operating voltage display
  1 x green LED
• Contact type
  4 enabling current paths
• Limiting continuous current
  6 A (N/O contact)
• Sq. Total current
  72 A2
• Interrupting rating (ohmic load) max.
  144 W (N/O contact, 24 V DC, τ = 0 ms)
• Switching capacity
  min. 50 mW
• Relay type
  Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
• Min. degree of protection of inst. location
  IP54
• Connection method
  Spring-cage connection
• pluggable
  no
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Stripping length
  8 mm
• Category
  1
• Rated insulation voltage
  250 V
• ECLASS 4.1
  27371100
ECLASS 5.0
27371600
ETIM 3.0
EC001449
UNSPSC 13.2
39121501
UNSPSC 19.0
39122334
Height
114.5 mm
Ambient temperature (operation)
-20 °C ... 55 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Input voltage range
19.2 V AC/DC ... 26.4 V AC/DC
Typ. starting time with Us
typ. 10 ms (when controlled via A1)
Typical release time
typ. 10 ms (when controlled via A1)
Maximum switching frequency
0.5 Hz
Maximum switching voltage
230 V AC/DC (Observe the load curve)
Maximum inrush current
6 A
Maximum interrupting rating (inductive load)
48 W (N/O contact, 24 V DC, τ = 40 ms)
Switching capacity according to IEC 60947-5-1
5 A (24 V (DC13))
Nominal operating mode
100% operating factor
Mounting type
DIN rail mounting
Mounting position
vertical or horizontal
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Safety Integrity Level (SIL)
1
Performance level (PL)
c
Overvoltage category
III
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27371100
ECLASS 6.0
27371600
UNSPSC 6.01
30211901
UNSPSC 18.0
39122334
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Designation
Air clearances and creepage distances between the power circuits
Safety Integrity Level Claim Limit (SIL CL)
1
Degree of pollution
2
Vibration (operation)
10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 2 ms.)
ECLASS 10.0.1
27371601
ECLASS 7.0
27371601
ETIM 6.0
EC001437
ETIM 7.0
EC001437
UNSPSC 12.01
39121501
Rated control circuit supply voltage US
24 V AC/DC -20 % / +10 %
Power consumption at US
typ. 1.25 W
Recovery time
< 500 ms
Contact material
AgSnO2
Inrush current, minimum
10 mA
Minimum switching voltage
5 V AC/DC
Mechanical service life
10x 106 cycles
Output fuse
10 A gL/gG (N/O contact)
Net weight
89 g
Degree of protection
IP20
Housing color
green
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Stop category
0
Standards/regulations
DIN EN 50178
Shock
15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.)
ECLASS 5.1
27371600
ETIM 2.0
EC001449
UNSPSC 7.0901
39121501
UNSPSC 20.0
39122334
Conductor cross-section AWG
24 ... 16
Torque
0.6 Nm
Rated surge voltage/insulation
Safe isolation, reinforced insulation 6 kV between input circuit (A1/A2) and all output current paths
Conformance
CE-compliant
ECLASS 11.0
27371601
ECLASS 9.0
27371601
ETIM 4.0
EC001449
UNSPSC 11
39121501
UNSPSC 21.0
39122334