2981431 Phoenix Contact Electrical Safety Devices

Product Details

• Height
  112 mm
• Power consumption at US
  typ. 3.72 W
• Voltage at input/start and feedback circuit
  24 V DC -15 % / +10 %
• Recovery time
  < 1 s
• Maximum switching frequency
  0.5 Hz
• Maximum switching voltage
  250 V AC/DC (Observe the load curve)
• Sq. Total current
  55 A2 (observe derating)
• Nominal operating mode
  100% operating factor
• Mounting type
  DIN rail mounting
• Conductor cross section flexible
  0.2 mm² ... 1.5 mm²
• Stop category
  0
• Safety Integrity Level Claim Limit (SIL CL)
  3 (for delayed contacts SILCL 2)
• Degree of pollution
  2
• ECLASS 11.0
  27371819
• ECLASS 5.1
  27371900
• ETIM 6.0
  EC001449
• UNSPSC 11
  39121501
• UNSPSC 13.2
  39121501
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -40 °C ... 70 °C
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Inrush current
200 mA (at US)
Typical release time
< 20 ms (when controlled via S11/S12 and S21/S22)
Filter time
1 ms (at A1 in the event of voltage dips at Us)
Limiting continuous current
6 A (N/O contact, pay attention to the derating)
Maximum interrupting rating (inductive load)
42 W (24 V DC, τ = 40 ms, delayed contacts: 48 W)
Switching capacity min.
50 mW
Net weight
336.53 g
Min. degree of protection of inst. location
IP54
pluggable
Yes
Conductor cross-section AWG
24 ... 16
Safety Integrity Level (SIL)
3 (for delayed contacts SIL 2)
Rated insulation voltage
250 V AC
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 10.0.1
27371819
ECLASS 5.0
27371900
ETIM 4.0
EC001449
UNSPSC 12.01
39121501
UNSPSC 19.0
39122205
Ambient temperature (operation)
-20 °C ... 55 °C (observe derating)
Rated control circuit supply voltage US
24 V DC -15 % / +10 %
Concurrence
∞
Status display
4 x green LEDs
Contact type
5 enabling current paths
Interrupting rating (ohmic load) max.
144 W (24 V DC, τ = 0 ms)
Output fuse
10 A gL/gG (N/O contact)
Mounting position
any
Housing color
yellow
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Designation
Air clearances and creepage distances between the power circuits
Standards/regulations
DIN EN 50178/VDE 0160
Shock
15g
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
40020600
ECLASS 9.0
27371819
ETIM 2.0
EC001449
ETIM 7.0
EC001449
UNSPSC 21.0
39122205
Depth
114.5 mm
Maximum altitude
≤ 2000 m (Above sea level)
Rated control supply current IS
typ. 155 mA
Typical response time
< 600 ms (automatic start)
Operating voltage display
1 x green LED
Max. permissible overall conductor resistance
approx. 22 Ω (Input and start circuits at US)
Minimum switching voltage
5 V AC/DC
Inrush current, minimum
10 mA
Mechanical service life
10x 106 cycles
Degree of protection
IP20
Connection method
Push-in connection
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Category
4 (Undelayed contacts)
Rated surge voltage/insulation
Basic insulation 4 kV:between all current paths and housingSafe isolation, reinforced insulation 6 kV:between 13/14, 23/24, 33/34, and the remaining current pathsbetween 13/14, 23/24, 33/34 among one another
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27371819
ECLASS 6.0
27371800
UNSPSC 6.01
30211901
UNSPSC 20.0
39122205
Width
45 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Current consumption
< 40 mA (with Us/Ix to S10)
Typ. starting time with Us
< 600 ms (when controlled via A1)
Protective circuit
Surge protection Suppressor diode
Contact material
AgSnO2
Maximum inrush current
20 A (Δt  100 ms, undelayed contacts)
Switching capacity (360/h cycles)
4 A (24 V DC)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Housing material
PBT
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Stripping length
8 mm
Performance level (PL)
e (for delayed contacts PL d)
Overvoltage category
III
Conformance
CE-compliant
ECLASS 4.1
40020600
ETIM 3.0
EC001449
UNSPSC 7.0901
39121501
UNSPSC 18.0
39122205