2980335 Phoenix Contact Control Relays

Product Details

• ECLASS 4.1
  27371100
• ECLASS 9.0
  27371603
• ETIM 4.0
  EC001456
• UNSPSC 6.01
  30211917
• UNSPSC 12.01
  39121516
• UNSPSC 19.0
  39122335
• UNSPSC 21.0
  39122335
• Width
  6.2 mm
• Height
  80 mm
• Ambient temperature (operation)
  -40 °C ... 55 °C
• Input voltage range in reference to UN
  0.78 ... 1.14
• Nominal input voltage UN
  230 V AC
• Protective circuit
  Bridge rectifier Bridge rectifier
• Fitting of components
  OPT-60DC/230AC/1
• Contact type
  Single contact, 1 changeover contact
• Minimum switching voltage
  24 V AC
• Maximum inrush current
  30 A (10 ms)
• Interrupting rating (ohmic load) max.
  1.2 W (at 24 V DC)
• Note
  If the specified maximum values are exceeded, the gold plating is destroyed. The maximum values of the power contact relay are then valid. This can result in a shorter service life than with a pure power contact.
• Color
  gray
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Depth
94 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical release voltage
80 V AC
Status display
LED
Compatible components
Miniature relay, REL-MR-60DC/21AU, REL-MR-60DC/21; miniature optocoupler, OPT-60DC/48DC/100, OPT-60DC/24DC/2, OPT-60DC/230AC/1
Contact material
AgSnO, hard gold-plated
Maximum switching voltage
253 V AC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Limiting continuous current
0.75 A
Min. switching current
1 mA (at 24 V)
Switching capacity min.
100 µW
Output circuit
2-conductor, floating
Leakage current
< 1 mA
Max. load value
4.5 A2s
Mounting position
any
Connection name
Output side
Stripping length
8 mm
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 14
Designation
Corrosive gas test
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27371603
ECLASS 5.0
27371600
ECLASS 6.0
27371600
ETIM 3.0
EC001456
ETIM 6.0
EC001456
UNSPSC 11
39121516
UNSPSC 13.2
39122326
Voltage drop at max. limiting continuous current
< 1 V AC
Phase angle cos phi min
0.5
Operating mode
100% operating factor
Flammability rating according to UL 94
V0 (Housing)
Assembly instructions
In rows with zero spacing
Connection method
Screw connection
Screw thread
M3
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Connection in acc. with standard
CUL
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 10.0.1
27371603
ECLASS 4.0
27371100
ECLASS 5.1
27371600
ECLASS 7.0
27371603
ETIM 2.0
EC001456
ETIM 7.0
EC001456
UNSPSC 7.0901
39121516
UNSPSC 18.0
39122335
UNSPSC 20.0
39122335