2967662 Phoenix Contact Control Relays

Product Details

• Height
  80 mm
• Typical response time
  7 ms
• Operating voltage display
  Yellow LED
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical release time
  10 ms
• Type of switch contact
  Single contact
• Test voltage
  4 kV AC (50 Hz, 1 min., winding/contact)
• Connection name
  Contact side
• Designation
  Corrosive gas test
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 4.1
  27371100
• ETIM 3.0
  EC001437
• UNSPSC 6.01
  30211916
• UNSPSC 12.01
  39121515
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Degree of protection
  RT II (Relay)
• Protective circuit
  Bridge rectifier Bridge rectifier
• Limiting continuous current
  10 A
• Operating mode
  100% operating factor
• Conductor cross section solid
  0.14 mm² ... 2.5 mm²
Rated surge voltage
6 kV
ECLASS 10.0.1
27371601
ECLASS 6.0
27371600
ECLASS 7.0
27371601
UNSPSC 11
39121515
UNSPSC 19.0
39122334
Width
14 mm
Depth
94 mm
Nominal input voltage UN
120 V AC
Contact type
1 changeover contact
Maximum inrush current
30 A (300 ms)
Interrupting rating (ohmic load) max. bridged
144 W (for 24 V DC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.)
Mechanical service life
3x 107 cycles
Stripping length
8 mm
Conductor cross section AWG
26 ... 14
Pollution degree
2
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27371600
ETIM 2.0
EC001437
ETIM 7.0
EC001437
UNSPSC 13.2
39122334
Ambient temperature (operation)
-40 °C ... 60 °C
Typical input current at UN
4.2 mA (at 110 V DC)
Power dissipation for nominal condition
0.54 W
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Min. switching current
10 mA (at 12 V)
Flammability rating according to UL 94
V0 (Housing)
Mounting position
any
Screw thread
M3
Connection in acc. with standard
CUL
Insulation
Safe isolation, reinforced insulation
ECLASS 4.0
27371100
ECLASS 9.0
27371601
ETIM 6.0
EC001437
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334
Contact material
AgNi
Minimum switching voltage
12 V (at 10 mA)
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
Switching capacity
2 A (at 24 V, DC13)
Assembly instructions
In rows with zero spacing
Connection method
Screw connection
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Standards/regulations
IEC 60664
Overvoltage category
III
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27371601
ECLASS 5.0
27371600
ETIM 4.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 20.0
39122334