2966294 Phoenix Contact Control Relays

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Depth
  94 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical release time
  15 ms
• Typical response time
  7 ms
• Type of switch contact
  Single contact
• Minimum switching voltage
  5 V (at 100 mA)
• Maximum inrush current
  50 mA
• Switching capacity
  2 A (at 24 V, DC13)
• Operating mode
  100% operating factor
• Mechanical service life
  2x 107 cycles
• Connection method
  Screw connection
• Conductor cross section AWG
  26 ... 14
• Pollution degree
  3
• REACh SVHC
  Lead 7439-92-1
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 4.0
  27371100
• ECLASS 5.1
  27371600
• ECLASS 9.0
  27371601
• ETIM 4.0
  EC001437
ETIM 7.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 12.01
39121515
Width
6.2 mm
Degree of protection
IP20 (Relay base)
Operating voltage display
Yellow LED
Contact type
1 changeover contact
Contact material
AgSnO, hard gold-plated
Limiting continuous current
6 A
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Flammability rating according to UL 94
V0 (Housing)
Connection name
Contact side
Screw thread
M3
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Connection in acc. with standard
CUL
Standards/regulations
IEC 60664
ECLASS 10.0.1
27371601
ECLASS 11.0
27371601
ECLASS 5.0
27371600
ETIM 2.0
EC001437
ECLASS 7.0
27371601
UNSPSC 11
39121515
UNSPSC 18.0
39122334
UNSPSC 19.0
39122334
UNSPSC 20.0
39122334
Height
80 mm
Nominal input voltage UN
230 V AC
Protective circuit
Bridge rectifier Bridge rectifier
Power dissipation for nominal condition
0.74 W
Maximum switching voltage
250 V AC/DC
Min. switching current
10 mA (at 12 V)
Note
the following values are applicable if a gold layer is destroyed
Test voltage
4 kV AC (50 Hz, 1 min., winding/contact)
Mounting position
any
Assembly instructions
In rows with zero spacing
Stripping length
8 mm
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Designation
Corrosive gas test
Overvoltage category
III
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 4.1
27371100
ECLASS 6.0
27371600
ETIM 3.0
EC001437
ETIM 6.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 6.01
30211916
UNSPSC 21.0
39122334
Ambient temperature (operation)
-40 °C ... 55 °C
Typical input current at UN
3.2 mA (at UN = 230 V AC)