2966184 Phoenix Contact Control Relays

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Depth
  94 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Protective circuit
  Bridge rectifier Bridge rectifier
• Type of switch contact
  Single contact
• Type of note
  Notes on operation
• Height
  80 mm
• Nominal input voltage UN
  24 V AC/DC
• Typical release time
  15 ms
• Typical response time
  6 ms
• Contact material
  AgSnO
• Maximum switching voltage
  250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
• Maximum inrush current
  10 A (4 s)
• Operating mode
  100% operating factor
• Screw thread
  M3
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Connection in acc. with standard
  CUL
• Pollution degree
  3
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 10.0.1
  27371601
ECLASS 5.0
27371600
ETIM 3.0
EC001437
ETIM 6.0
EC001437
UNSPSC 12.01
39121515
UNSPSC 21.0
39122334
ECLASS 6.0
27371600
ETIM 7.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 19.0
39122334
Note
Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
Degree of protection
IP20 (Relay base)
Operating voltage display
Yellow LED
Power dissipation for nominal condition
0.26 W
Limiting continuous current
6 A
Flammability rating according to UL 94
V0 (Housing)
Assembly instructions
In rows with zero spacing
Connection name
Contact side
UNSPSC 18.0
39122334
Width
6.2 mm
Ambient temperature (operation)
-40 °C ... 60 °C
Typical input current at UN
11 mA (at UN = 24 V AC)
Contact type
1 changeover contact
Min. switching current
10 mA (at 12 V)
Switching capacity
2 A (at 24 V, DC13)
Mechanical service life
2x 107 cycles
Connection method
Screw connection
Conductor cross section AWG
26 ... 14
Overvoltage category
III
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 4.1
27371100
ECLASS 5.1
27371600
ECLASS 9.0
27371601
ETIM 2.0
EC001437
UNSPSC 11
39121515
UNSPSC 13.2
39122334
Minimum switching voltage
5 V (at 100 mA)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Test voltage
4 kV AC (50 Hz, 1 min., winding/contact)
Mounting position
any
Stripping length
8 mm
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Standards/regulations
IEC 60664
Designation
Corrosive gas test
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27371601
ECLASS 4.0
27371100
ECLASS 7.0
27371601
ETIM 4.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 20.0
39122334