2966171 Phoenix Contact Control Relays

Product Details

• Type of note
  Notes on operation
• Depth
  94 mm
• Typical response time
  5 ms
• Degree of protection
  RT III (Relay)
• Type of switch contact
  Single contact
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Typical input current at UN
  9 mA
• Overvoltage category
  III
• Width
  6.2 mm
• Nominal input voltage UN
  24 V DC
• Power dissipation for nominal condition
  0.22 W
• Contact material
  AgSnO
• Interrupting rating (ohmic load) max.
  140 W (at 24 V DC)
• Test voltage
  4 kV AC (50 Hz, 1 min., winding/contact)
• Connection method
  Screw connection
• Designation
  Corrosive gas test
• REACh SVHC
  Lead 7439-92-1
• ECLASS 5.1
  27371600
• ECLASS 9.0
  27371601
• ETIM 7.0
  EC001437
UNSPSC 19.0
39122334
UNSPSC 21.0
39122334
Height
80 mm
Protective circuit
Reverse polarity protection Polarity protection diode
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Limiting continuous current
6 A
Operating mode
100% operating factor
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Connection in acc. with standard
CUL
ECLASS 11.0
27371601
ECLASS 7.0
27371601
UNSPSC 6.01
30211916
UNSPSC 12.01
39121515
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Maximum inrush current
10 A (4 s)
Mechanical service life
2x 107 cycles
Screw thread
M3
Stripping length
8 mm
Standards/regulations
IEC 60664
ECLASS 4.0
27371100
ECLASS 5.0
27371600
ETIM 3.0
EC001437
UNSPSC 11
39121515
UNSPSC 18.0
39122334
Note
Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
Ambient temperature (operation)
-40 °C ... 60 °C
Typical release time
8 ms
Contact type
1 changeover contact
Min. switching current
10 mA (at 12 V)
Flammability rating according to UL 94
V0 (Housing)
Assembly instructions
In rows with zero spacing
Conductor cross section AWG
26 ... 14
Identification
ISA-S71.04. G3 Harsh Group
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27371600
ETIM 2.0
EC001437
ETIM 6.0
EC001437
UNSPSC 13.2
39122334
Operating voltage display
Yellow LED
Minimum switching voltage
5 V (at 100 mA)
Switching capacity
2 A (at 24 V, DC13)
Mounting position
any
Connection name
Contact side
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Pollution degree
3
ECLASS 10.0.1
27371601
ECLASS 4.1
27371100
ETIM 4.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 20.0
39122334