2963970 Phoenix Contact Electrical Safety Devices

Product Details

• Width
  22.5 mm
• Ambient temperature (operation)
  -20 °C ... 55 °C
• Rated control circuit supply voltage US
  24 V AC/DC -15 % / +10 %
• Inrush current
  typ. 350 mA DC (Δt < 1 µs at Us)
• Operating voltage display
  1 x green LED
• Performance level (PL)
  c
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Power consumption at US
  typ. 1.2 W
• Sq. Total current
  72 A2
• Mechanical service life
  10x 106 cycles
• Nominal operating mode
  100% operating factor
• Housing color
  yellow
• Conductor cross section solid
  0.2 mm² ... 1.5 mm²
• Conductor cross-section flexible with ferrule without plastic sleeve
  0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
• Torque
  0.6 Nm
• Conformance
  CE-compliant
• ECLASS 9.0
  27371601
• ETIM 3.0
  EC001449
• UNSPSC 7.0901
  39121501
• UNSPSC 13.2
  39121501
Height
114.5 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Rated control supply current IS
typ. 47 mA
Typ. starting time with Us
typ. 20 ms (when controlled via A1)
Protective circuit
Surge protection Varistor
Maximum switching voltage
230 V AC/DC (Observe the load curve)
Inrush current, minimum
10 mA
Switching capacity according to IEC 60947-5-1
3 A (24 V (DC13))
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Min. degree of protection of inst. location
IP54
Connection method
Push-in connection
Stripping length
8 mm
Rated insulation voltage
250 V
ECLASS 4.0
27371100
ECLASS 6.0
27371600
ETIM 2.0
EC000196
ETIM 7.0
EC001437
UNSPSC 11
39121501
UNSPSC 20.0
39122334
Depth
112 mm
Maximum altitude
max. 2000 m (Above sea level)
Recovery time
< 500 ms
Contact type
5 enabling current paths
Maximum inrush current
6 A
Switching capacity
min. 50 mW
Maximum interrupting rating (inductive load)
42 W (N/O contact, 24 V DC, τ = 40 ms)
Degree of protection
IP20
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Stop category
0
Safety Integrity Level Claim Limit (SIL CL)
1
Shock
15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.)
ECLASS 11.0
27371819
ECLASS 5.1
27371600
ECLASS 5.0
27371600
ETIM 6.0
EC001437
UNSPSC 12.01
39121501
UNSPSC 19.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Input voltage range
20.4 V AC/DC ... 26.4 V AC/DC
Typical release time
typ. 20 ms (when controlled via A1)
Maximum switching frequency
0.5 Hz
Minimum switching voltage
5 V AC/DC
Limiting continuous current
6 A (N/O contact)
Output fuse
10 A gL/gG (N/O contact)
Mounting position
any
Housing material
PBT
Conductor cross-section AWG
24 ... 16
Designation
Air clearances and creepage distances between the power circuits
Category
1
Rated surge voltage/insulation
Safe isolation 4 kV between all current paths and housing
Degree of pollution
2
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27371100
Contact material
AgSnO2
Interrupting rating (ohmic load) max.
144 W (N/O contact, 24 V DC, τ = 0 ms)
Switching capacity (360/h cycles)
4 A (24 V (DC13))
Net weight
148 g
Mounting type
DIN rail mounting
pluggable
Yes
Safety Integrity Level (SIL)
1
Standards/regulations
DIN EN 50178
Overvoltage category
II
Vibration (operation)
10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.)
ECLASS 10.0.1
27371601
ECLASS 7.0
27371601
ETIM 4.0
EC001449
UNSPSC 6.01
30211901
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334