2963941 Phoenix Contact Electrical Safety Devices

Product Details

• Depth
  114.5 mm
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Voltage at input/start and feedback circuit
  approx. 24 V DC
• Concurrence
  ∞
• Protective circuit
  Surge protection Suppressor diode
• Minimum switching voltage
  15 V AC/DC
• Inrush current, minimum
  25 mA
• Switching capacity min.
  0.4 W
• Mounting position
  any
• Housing color
  yellow
• Conductor cross-section flexible with ferrule without plastic sleeve
  0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
• Designation
  Air clearances and creepage distances between the power circuits
• Rated insulation voltage
  250 V
• Overvoltage category
  III
• Vibration (operation)
  10 Hz ... 150 Hz, 2g
• ECLASS 11.0
  27371819
• Nominal operating mode
  100% operating factor
• ECLASS 6.0
  27371800
• ETIM 2.0
  EC000196
• ETIM 4.0
  EC001449
UNSPSC 12.01
39121501
UNSPSC 21.0
39122205
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-20 °C ... 55 °C
Maximum altitude
≤ 2000 m (Above sea level)
Typical input current at UN
140 mA AC
Typical response time
100 ms (automatic start)
Recovery time
1 s
Contact material
AgSnO2, + 0.2 µm Au
Maximum inrush current
6 A
Interrupting rating (ohmic load) max.
144 W (24 V DC, τ = 0 ms)
Output fuse
10 A gL/gG NEOZED (N/O contact)
Net weight
221.9 g
Degree of protection
IP20
Connection method
Push-in connection
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Stripping length
8 mm
Safety Integrity Level (SIL)
3
Safety Integrity Level Claim Limit (SIL CL)
3
Rated surge voltage/insulation
4 kV / basic insulation (safe isolation, reinforced insulation, and 6 kV between A1-A2/logic/enabling and signaling current paths)
ECLASS 10.0.1
27371819
ECLASS 4.1
40020600
ETIM 6.0
EC001449
UNSPSC 18.0
39122205
Height
112 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Input voltage range in reference to UN
0.85 ... 1.1
Typical release time
45 ms (single-channel)
Max. permissible overall conductor resistance
approx. 50 Ω (Input and start circuits at UN)
Limiting continuous current
6 A (N/O contact)
Sq. Total current
72 A2 (ITH2 = I12 + I22 + I32)
Mechanical service life
approx. 107 cycles
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Min. degree of protection of inst. location
IP54
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Stop category
0
Standards/regulations
DIN EN 50178/VDE 0160
Shock
15g
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
40020600
ECLASS 5.1
27371900
ETIM 3.0
EC001449
ETIM 7.0
EC001449
UNSPSC 11
39121501
UNSPSC 20.0
39122205
Width
22.5 mm
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Nominal input voltage UN
24 V AC/DC
Operating voltage display
Green LED
Status display
Green LED
Contact type
3 enabling current paths
Maximum switching voltage
250 V AC/DC
Maximum interrupting rating (inductive load)
48 W (24 V DC, τ = 40 ms)
Switching capacity (360/h cycles)
6 A (24 V DC)
Mounting type
DIN rail mounting
pluggable
Yes
Conductor cross-section AWG
24 ... 16
Performance level (PL)
e
Category
4
Degree of pollution
2
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 9.0
27371819
UNSPSC 6.01
30211901
UNSPSC 13.2
39121501
ECLASS 5.0
27371900
ECLASS 7.0
27371819
UNSPSC 7.0901
39121501
UNSPSC 19.0
39122205