2963802 Phoenix Contact Electrical Safety Devices

Product Details

• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Power consumption at US
  typ. 3.36 W (AC)
• Typical release time
  < 45 ms (when controlled via S12)
• Recovery time
  < 1 s
• Filter time
  2 ms (at A1 in the event of voltage dips at Us)
• Sq. Total current
  72 A2 (observe derating)
• Mechanical service life
  10x 106 cycles
• Relay type
  Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
• Degree of protection
  IP20
• Conductor cross section solid
  0.2 mm² ... 2.5 mm²
• Stop category
  0
• Category
  1 (up to Cat. 4 depending on the application)
• Rated insulation voltage
  250 V AC
• ECLASS 11.0
  27371819
• ETIM 2.0
  EC000196
• ETIM 7.0
  EC001449
• UNSPSC 12.01
  39121501
• UNSPSC 20.0
  39122205
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Depth
  114.5 mm
Ambient temperature (operation)
-20 °C ... 65 °C (observe derating)
Maximum altitude
≤ 2000 m (Above sea level)
Voltage at input/start and feedback circuit
24 V DC -15 % / +10 %
Typical response time
< 65 ms (automatic start)
Protective circuit
Surge protection Suppressor diode
Contact material
AgSnO2
Width
22.5 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Rated control circuit supply voltage US
24 V AC/DC -15 % / +10 %
Inrush current
2 A (Δt = 10 ms at Us)
Operating voltage display
1 x green LED
Maximum switching frequency
1 Hz
Maximum inrush current
20 A (Δt  100 ms)
Output fuse
10 A gL/gG (N/O contact)
Mounting position
vertical or horizontal
Housing color
yellow
Min. degree of protection of inst. location
IP54
pluggable
Yes
Safety Integrity Level (SIL)
1 (up to SIL 3 depending on the application)
Degree of pollution
2
Conformance
CE-compliant
ECLASS 5.0
27371900
ECLASS 6.0
27371800
ETIM 3.0
EC001449
UNSPSC 19.0
39122205
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Current consumption
< 50 mA (with Us/Ix to S12)
Status display
2 x green LEDs
Maximum switching voltage
250 V AC/DC (Observe the load curve)
Inrush current, minimum
10 mA
Interrupting rating (ohmic load) max.
144 W (24 V DC, τ = 0 ms)
ECLASS 10.0.1
27371819
ECLASS 9.0
27371819
ETIM 6.0
EC001449
UNSPSC 6.01
30211901
UNSPSC 21.0
39122205
Height
99 mm
Rated control supply current IS
typ. 140 mA AC
Typ. starting time with Us
< 65 ms (when controlled via A1)
Max. permissible overall conductor resistance
approx. 22 Ω (Input and start circuits at US)
Contact type
4 enabling current paths
Limiting continuous current
6 A (N/O contact, pay attention to the derating)
Switching capacity min.
50 mW
Nominal operating mode
100% operating factor
Mounting type
DIN rail mounting
Housing material
PBT
Conductor cross-section AWG
24 ... 12
Stripping length
7 mm
Performance level (PL)
c (up to PL e depending on the application)
Rated surge voltage/insulation
Basic insulation 4 kV:between all current paths and housingSafe isolation, reinforced insulation 6 kV:between A1/A2 and 13/14, 23/24, 33/34, 43/44between S11/S12/S33/S34 and 13/14, 23/24, 33/34, 43/44between 51/52 and 13/14, 23/24, 33/34, 43/44
Shock
15g
Overvoltage category
III
ECLASS 4.0
40020600
ECLASS 5.1
27371900
ECLASS 7.0
27371819
UNSPSC 11
39121501
UNSPSC 13.2
39121501
Minimum switching voltage
5 V AC/DC
Maximum interrupting rating (inductive load)
42 W (24 V DC, τ = 40 ms)
Switching capacity (360/h cycles)
4 A (24 V DC)
Net weight
210.5 g
Assembly instructions
See derating curve
Connection method
Screw connection
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Screw thread
M3
Designation
Air clearances and creepage distances between the power circuits
Safety Integrity Level Claim Limit (SIL CL)
1 (up to SILCL 3 depending on the application)
Standards/regulations
DIN EN 50178/VDE 0160
Vibration (operation)
10 Hz ... 150 Hz, 2g
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
40020600
ETIM 4.0
EC001449
UNSPSC 7.0901
39121501
UNSPSC 18.0
39122205